A durable and high performance acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for structural steel, as well as other exterior and interior uses. Top Features Smooth, attractive, high build finish Excellent corrosion protection Meets most VOC...
Mathys Fassilux Satin
A first quality satin gloss alkyd enamel, for interior and exterior woodwork, to be used as a topcoat on wood and all pretreated not alkaline substrates.
Mathys Fassilux Satin is a first quality satin gloss alkyd enamel, for interior and exterior work. To be used as a topcoat for interior and exterior woodwork, applicable on wood and all pretreated not alkaline substrates.
Features & Benefits
- Simple and fast application
- Excellent flow
- Excellent scratch and wear resistance
- Good outdoor durability, weatherproof
- Quick drying
- Good coverage
- Even gloss finish
- Good edge coverage
- High gain
- Can be tinted in virtually any colour
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 18m² per litre
- Touch Dry
- 5 hours
|Norma burns on 23/11/2016|| |
Question: Would this paint require an undercoat over previous painted wood,if not would 2 top coats be sufficient?,one last question does this paint come in dark brown,thanks I await your advice.
Over existing, compatible painted surfaces after preparation (cleaning and light sanding to provide a key) you can apply 2-3 coats as required of Mathys Fassilux Satin directly to the prepared, dry surfaces.
A clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins that can be used indoors and outdoors and is solvent based giving excellent durability.
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s...
A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.
Coo-Var Gloss is a high quality, oil-based coating with excellent opacity that dries to a high gloss finish and is 2010 compliant. ADVANTAGES Interior/Exterior use High gloss finish 2010 compliant (VOC Directive) Use on a variety of substrates Protects Decorates
A waterborne acrylic satin gloss paint for interior and exterior woodwork, both bare and previously painted. Pegacryl Satin has weather resistance better than most synthetic enamels and can also be used as a topcoat for Noxyde.
Transform your interior wooden surfaces with Blackfriar Quick Drying Varnish. Ideal for all interior wood including doors and panelling, it provides a quick drying finish that is tough and durable. Blackfriar Quick Drying Varnish resists knocks, hot water splashes and some household stains.
For commercial or domestic use, on floors, stairs, panelling etc. Timberex Coloured penetrates deeply into the wood filling the pores to form a wear and water resistant surface.
Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.
Get creative – enrich and gild interior and exterior surfaces with Blackfriar Metallic Paint. Ideal for ornamental plasterwork, picture frames, decorations, theatre props, furniture, radiators and textured wall finishes.
Thermilate InsOpaint Gloss is an innovative, eco-friendly, water based gloss paint with a non-yellowing finish, ideal for interior wood and metal. This specially formulated, water based gloss gives all the appearance and characteristics of traditional gloss but has advanced durability, high opacity and fast drying times.