Mathys Fassiprim Aqua XPE

    21AQ.1.1

    We no longer stock this product, but can recommend Zinsser Bulls Eye 1-2-3 as a great alternative.

    Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

    Mathys Fassiprim Aqua XPE is a water-based, moisture regulating primer for long-lasting bare or previously painted indoor and outdoor timberwork. Easy and fast to apply and has excellent flow properties that ensure an even and professional result.

    • Water based, matt acrylic
    • Easy to apply, virtually odourless
    • Quick drying, quick to sand
    • Good coverage, adherence and hiding power
    • Excellent adhesion and flow
    • Damp regulating
    • Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours

    Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

    Quantity
    Product not available
    This Product has been Discontinued

    Description

    Mathys Fassiprim Aqua XPE waterbased breathable primer offers the best of both worlds. Fassiprim Aqua XPE is a water dilutable, breathable primer for long lasting interior and exterior bare or previously painted timber. It is as easy to use as a solvent based paint but has the advantages of a water based system.

    Mathys Fassiprim Aqua XPE is easy and fast to apply and has excellent flow properties that ensure an even and professional result. Fassilux Aqua XPE Topcoats are available in satin and high gloss versions for outdoor use and a matt version for indoors.

    Features & Benefits

    • Water based, matt acrylic
    • Easy to apply, virtually odourless
    • Quick drying, quick to sand
    • Good coverage, adherence and hiding power
    • Excellent adhesion and flow
    • Damp regulating

    Technical Data

    • Density: ± 1,3
    • Gloss Level: Matt
    • Solids content in volume: ± 39 %
    • Solids Content in weight: ± 53 %

    Drying Times At 20°C/RH 50%

    • Touch dry: 1 hour
    • Dry to recoat: 3 hours
    • Fully cured: 1 week

    Theoretical Consumption

    ± 10 m²/l

    Practical Consumption

    Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

    Surface Preparation

    • New work: substrate has to be clean, dry and free of fats. Deteriorated wood has to be removed to the sound wood. For very porous substrates like fir and pine it is recommended to apply a second primer coat.
    • Existing work: clean, degrease and sand. Remove loose, flaking or cracked paint layers. Treat bare spots as new work.

    Directions For Use

    To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

    Application Conditions

    10-30 degrees C. Relative humidity < 80%. Temperature of the substrate at least 3 degrees C above the dewpoint.

    Application Methods

    • Brush: Dilute, if necessary, up to maximum 5% volume with water
    • Roller: Dilute, if necessary, up to maximum 5% volume with water
    • Airless Spray: Nozzle: 0.013 inch / Pressure: 120 - 150 bars.  Thinning 3% volume water
    • Air-Atomised Spray: Nozzle 1,5 - 2,0 mm / Pressure: 2 - 3 bars.  Thinning 10 - 15% volume water
    Product Details
    21AQ.1.1

    Data sheet

    Manufacturer
    Rust-Oleum
    For Use By
    Consumer Use
    For Use By
    Industrial Use
    For Use By
    Professional Use
    Interior / Exterior Use
    Interior & Exterior
    Interior / Exterior Use
    Interior and Exterior
    Water / Solvent Based
    Water
    For Use On
    Prepared
    Application Method
    Brush, Roller, Airless Spray, Air-Atomised Spray
    Colour
    Standard / Ready Mixed
    VOC Levels
    Ultra-Low (5-49 g/l)
    Single, Two or Three Pack
    Single
    Pack Size
    2.5L
    Base Type
    Water based
    Dry to Recoat (at 20°C)
    3 hours
    Fully Cured (at 20°C)
    1 week
    Coverage
    10m² per litre
    Max. Application Temperature
    30°C
    Min. Application Temperature
    10°C
    Density
    ± 1,3
    Solids by Volume
    ± 39 %
    VOC
    17 g/l max
    Touch Dry
    1 hour
    Recommended Dry Film Thickness
    35 µm
    Recommended Wet Film Thickness
    100 µm
    UN Number
    Not regulated
    Usages
    Wood
    Product Usage Type
    Primer
    Type of Wood Finish
    Wood Primers
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Mathys Fassiprim Aqua XPE is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Mathys Fassilux Aqua XPE Matt

    We no longer stock this product, but can recommend Zinsser Allcoat Exterior Matt Water Based as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical...

    In stock

    Mathys Fassilux Aqua XPE Gloss

    We no longer stock this product, but can recommend Zinsser Allcoat Exterior Gloss Water Based as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical...

    In stock

    Mathys Fassilux Aqua XPE Satin

    We no longer stock this product, but can recommend Zinsser Allcoat Exterior Satin Water Based as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical...

    In stock

    General Painting Application Kit

    General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

    Price £10.03 (ex. VAT)
    In Stock and Available for Delivery