Mathys Fassithane Gloss
  • Mathys Fassithane Gloss

Mathys Fassithane Gloss

631.1.1

Mathys Fassithane Gloss is a clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins that can be used indoors and outdoors and is solvent based giving excellent durability.

  • Quick drying
  • Does not yellow
  • Scratch and wear resistant
  • No tendency to wrinkle when applying thick layers
Colour
Size
Finish
£15.59
VAT excluded

£18.71 Tax incl.
Quantity

Description

Mathys Fassithane Gloss

Mathys Fassithane Gloss is a clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins. It can be used indoors and outdoors and is solvent based giving excellent durability.

Features & Benefits

  • Quick drying
  • Does not yellow
  • Scratch and wear resistant
  • No tendency to wrinkle when applying thick layers

Technical Data

  • Density: 0,90 - 0,92
  • Gloss Level: Gloss
  • Gloss level at 60º: >90%
  • Solids content in volume: 42 - 44 %
  • Solids Content in weight: 49,5 – 51,5 %

Drying Times At 20°C/RH 50%

  • Touch dry: 1½ hours
  • Dry to handle: 2 hours
  • Dry to recoat: 6 hours
  • Fully cured: 7 days

Theoretical Consumption

± 15 m²/l per coat

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

The substrate must be smooth and completely dry and clean. New wood: rub down and make dustfree (use a cloth damped in white spirit). Degrease resinous or exotic wood with thinner. Remove old varnish layers with a paint stripper (Rapid Super). After this rub down lightly and clean with white spirit. Old varnish layers with good adhesion: rub down lightly and clean. Restore discoloured parts with Fassitek and rub down.

New Wood

  • Impregnate with Adex or Fassitek if it is necessary to colour the wood.
  • If colouring is not necessary, first apply a thinned coat Fassithane Gloss

Application Conditions

Apply in a dry and well-ventilated area. Temperature of air, substrate and coating material between 10 and 35°C and relative humidity below 80%. The substrate temperature must be at least 3°C above dew point.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
631.1.1

Data sheet

Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
2 hours
Dry to Recoat (at 20°C)
6 hours
Fully Cured (at 20°C)
7 days
Coverage
15m² per litre
Recommended Thinner/Cleaner
Thinner 22
Max. Application Temperature
35°C
Min. Application Temperature
10°C
Density
0,90 - 0,92
Solids by Volume
42 - 44 %
VOC
400 g/l max
Shelf Life (from date of manufacture)
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5 and 35°C.
Touch Dry
1.5 hours
Recommended Dry Film Thickness
30 µm
Recommended Wet Film Thickness
65 µm
UN Number
Not regulated
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum Thinner 22

Rust-Oleum Thinner 22 is for the dilution of synthetic enamels and varnishes for airless application. Degreasing of metals and most wood types. Cleaning of 'spots' of acrylic paints and acrylic fixing paints (e.g. on glass). Best used to dilute the following products: Primer 44 Fassiclor Galvaprim Vernac Gloss Vernac Satin

Price £6.41
In stock
16 other products in the same category:

Ardenbrite Protective Glaze

A quick drying clear coating for use over Ardenbrite Metallic Paint. For all external applications and for increased durability on internal applications (if required).

Price £32.10
In stock

Coo-Var Teak Oil

Coo-Var Siliconised Teak Oil is a blend of natural oils and silicone derivatives to enhance, preserve and restore the appearance of teak and other hardwoods. Good degree of resistance to water Can be used inside or outside Oil takes better to hardwood than traditional varnish Good on teak and other hardwoods Ideal for use on outdoor...

Price £14.76
In stock

Timberex Heavy Duty UV

Now includes a UV-blocker which will inhibit the bleaching of the surface by harmful UV rays using natural, fast drying oils and resins which penetrate deeply into the wood.

Price £18.80
In stock

Timberex Hard-Wax Oil

Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.

Price £19.32
In stock

Timberex Enviro

A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.

Price £23.00
In stock

Bedec Aqua-Advanced Gloss

A high quality, quick drying, non yellowing acrylic polyurethane gloss enamel for interior and exterior use on timber, metals, plastics, masonry, previously painted surfaces and more.

Price £21.61
In stock

Blackfriar Matt Black Paint

Blackfriar Matt Black Paint is a matt black non-reflective paint which is ideal for interior metal, wood and plaster. Recommended for timber beams, iron work, stage scenery and darkrooms. A practical and versatile product. Product Features Matt black. Non-reflective. Interior use. For wood, metal and plaster.

Price £14.08
In stock

Timberex Heavy-Duty UV PLUS

An improved version of the Timberex Heavy-Duty UV wood oil, with improved coverage, smell, water resistance, UV resistance and faster curing. 

Price £19.44
In stock

Mathys Fassithane Matt

Mathys Fassithane Matt is a hard, clear, durable finishing varnish for wood that is based on polyurethane alkyd resins. Quick drying, does not yellow and scratch and wear resistant. Quick drying Does not yellow Scratch and wear resistant No tendency to wrinkle when applying thick layers Indoor use only - easy to clean

Price £15.59
In stock

Timberex Coloured

For commercial or domestic use, on floors, stairs, panelling etc. Timberex Coloured penetrates deeply into the wood filling the pores to form a wear and water resistant surface.

Price £18.47
In stock

Bedec Aqua-Advanced Satin

A high quality, quick drying, non yellowing acrylic polyurethane satin enamel for interior and exterior use on timber, metals, plastics, masonry, previously painted surfaces and more.

Price £21.61
In stock

HMG Waterborne LMP Colours

HMG Waterborne LMP Colours. LMP is a high quality 1K Water-based Acrylic based paint range offering excellent drying characteristics. Excellent adhesion to a wide variety of substrates and ease of brushability. Developed as an alternative to solvent based alkyd synthetic enamels for situations where its particular properties are...

Price £26.10
In stock

Mathys Fassilux Satin

Mathys Fassilux Satin is a first quality satin gloss alkyd enamel, for interior and exterior woodwork, to be used as a topcoat on wood and all pretreated not alkaline substrates. Simple and fast application Excellent flow Excellent scratch and wear resistance Good outdoor durability, weatherproof Quick drying Good coverage Even gloss...

Price £14.24
In stock

Tor Matt Black

Tor Matt Black is a general purpose matt finish for blackboards, interior wrought iron work, dark rooms, welding booths etc. See further below for preparation for use on bare wood and previously-painted surfaces. Available in 3 sizes Good coverage - up to 12.5 square metres per litre Apply by brush, roller (short pile) or air spray An...

Price £10.37
In stock

Thermilate InsOpaint Gloss

Thermilate InsOpaint Gloss is an innovative, eco-friendly, water based gloss paint with a non-yellowing finish, ideal for interior wood and metal. This specially formulated, water based gloss gives all the appearance and characteristics of traditional gloss but has advanced durability, high opacity and fast drying times. Coverage Calculator

Price £59.95
In stock

Zanders Walls, Doors & Trim

Zanders Walls, Doors and Trim is a premium quality acrylic based product with an eggshell finish. Suitable for interior wood, metal & plaster and areas of high moisture, such as kitchens & bathrooms. Also suitable for use on wallboards, concrete, cement rendering, brickwork & blockwork in internal situations. Formulated with an...

Price £41.77
In stock