Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.
Mathys Fassilux Gloss
A solvent based high gloss enamel based on alkyd resins for use as a topcoat for interior and exterior woodwork. Applicable on wood and all pretreated not alkaline substrates.
Mathys Fassilux Gloss is a solvent based high gloss enamel based on alkyd resins for use as a topcoat for interior and exterior woodwork. Applicable on wood and all pretreated not alkaline substrates.
Features & Benefits
- Simple and fast application
- Excellent flow
- Excellent scratch and wear resistance
- Good outdoor durability, weatherproof
- Quick drying
- Good coverage
- Even gloss finish
- Good edge coverage
- High gain
- Can be tinted in virtually any colour
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 20m² per litre
- Touch Dry
- 3 hours
Be the first to ask a question about this product!
Perfect for when you need a dead black matt surface. Its non-reflective finish makes it ideal for all interior surfaces such as old beams, panelling, decorative ironwork, stage scenery and darkrooms. To be used on wood and metal.
A blend of natural oils for hardwood. Ideal for both indoor and outdoor wooden furniture. Makes timber look natural/oiled, provides sheen, takes better to hardwood than traditional varnish.
Coo-Var Gloss is a high quality, oil-based coating with excellent opacity that dries to a high gloss finish and is 2010 compliant. ADVANTAGES Interior/Exterior use High gloss finish 2010 compliant (VOC Directive) Use on a variety of substrates Protects Decorates
Transform interior woodwork with Blackfriar Polyurethane Varnish. This tough and durable varnish brings out the natural grain and colours of wooden surfaces – and protects them from household stains including hot water. For all types of interior wood, tough and durable, resists hot water splashes and dilute acids, solvent based.
Blackfriar Wood Dye penetrates deep into wood to enrich the colour of bare timber. It can be used on new interior and exterior timber, plywood and chipboard. Plus you can also mix the dye colours to create your own individual shades.
For commercial or domestic use, on floors, stairs, panelling etc. Timberex Coloured penetrates deeply into the wood filling the pores to form a wear and water resistant surface.
Zanders Walls, Doors & Trim is a premium quality acrylic based product with an eggshell finish. Suitable for interior wood, metal & plaster and areas of high moisture, such as kitchens & bathrooms. Also suitable for use on wallboards, concrete, cement rendering, brickwork & blockwork in internal situations. Formulated with an acrylic resin providing a...
A quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Anti-corrosive on all metals...
A blend of natural oils and silicone derivatives which enhance, preserve and restore the appearance of teak and other hardwoods giving a good degree of resistance to water and can be used inside or outside.
Coo-Var Danish Oil is a hard, durable, water resistant seal for the enhancement of interior and exterior wood containing tung oil. ADVANTAGES Harder finish than teak oil Durable Water resistant Slight gloss finish
A durable and high performance acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for structural steel, as well as other exterior and interior uses. Top Features Smooth, attractive, high build finish Excellent corrosion protection Meets most VOC...