A durable and high performance acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for structural steel, as well as other exterior and interior uses. Top Features Smooth, attractive, high build finish Excellent corrosion protection Meets most VOC...
Mathys Fassithane Satin
A clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins that can be used indoors and outdoors and is solvent based giving excellent durability.
Mathys Fassithane Satin is a clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins. It can be used indoors and outdoors and is solvent based giving excellent durability.
Features & Benefits
- Quick drying
- Does not yellow
- Scratch and wear resistant
- No tendency to wrinkle when applying thick layers
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 15m² per litre
- Touch Dry
- 1.5 hours
Be the first to ask a question about this product!
A blend of natural oils for hardwood. Ideal for both indoor and outdoor wooden furniture. Makes timber look natural/oiled, provides sheen, takes better to hardwood than traditional varnish.
Transform interior woodwork with Blackfriar Polyurethane Varnish. This tough and durable varnish brings out the natural grain and colours of wooden surfaces – and protects them from household stains including hot water. For all types of interior wood, tough and durable, resists hot water splashes and dilute acids, solvent based.
Get creative – enrich and gild interior and exterior surfaces with Blackfriar Metallic Paint. Ideal for ornamental plasterwork, picture frames, decorations, theatre props, furniture, radiators and textured wall finishes.
Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s Resistant...
Coo-Var Matt Black is an oil-based, flat black finish for interior and exterior use anywhere a non-reflective surface is required. ADVANTAGES Decorative Interior/Exterior use Non-reflective Apply direct onto wood and masonry Can be used on chalk
Blackfriar Danish Oil provides a beautiful, low lustre satin, scratch-proof finish. You can use it inside and outside for most wooden surfaces including furniture, doors, panelling, wood decorations and woodturning.
Blackfriar Teak Oil protects and revives wood – especially hard woods, teak and Scandinavian furniture. Protects against weathering and greying by nourishing and feeding the wood.
Rust-Oleum 4900 Polycoat 2K is a clear, water-based, 2-component polyurethane topcoat for use on wood, concrete and pre-painted surfaces, also serves as an anti-graffiti coating. Very abrasion resistant, available in a matt or gloss finish, does not yellow, can be used internally and externally, resists boiling water, alcohol, coffee, red...
Blackfriar Wood Dye penetrates deep into wood to enrich the colour of bare timber. It can be used on new interior and exterior timber, plywood and chipboard. Plus you can also mix the dye colours to create your own individual shades.