Coo-Var Siliconised Teak Oil is a blend of natural oils and silicone derivatives to enhance, preserve and restore the appearance of teak and other hardwoods. Good degree of resistance to water Can be used inside or outside Oil takes better to hardwood than traditional varnish Good on teak and other hardwoods Ideal for use on outdoor...
Coo-Var Ebony Black
Coo-Var Ebony Black provides a classic black finish with low sheen which makes it ideal for ironwork, beams, downpipes, radiators etc. Suitable for both interior and exterior applications.
- Can be applied to wood, metal and masonry
- Classic, black finish
- Interior and exterior use
Coo-Var Ebony Black is suitable for both interior and exterior applications. Providing a classical low sheen finish on gates, railings, lamps, ornamental ironwork, tudor style woodwork, barns and scoreboards etc.
- Tudor buildings
May be applied by roller, spray or brush to surfaces which are dry and free from wax, grease, dirt and dust. New unpainted surfaces: Prime with the appropriate Coo-Var Primer.
Previously painted surfaces: Rub down to promote adhesion and apply one or two coats as required.
On metal, use Coo-Var Zinc Phosphate Primer.
Health and Safety
Contains: COBALT CONTAINING POLYMER. May produce an allergic reaction.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 10m² per litre
- Recommended Thinner/Cleaner
- White Spirit
- Touch Dry
- 2-3 Hours
- Low Sheen
- UN Number
|Andy on 08/07/2015|| |
Is Coo-Var Ebony Black an oil based or water based product?
Zanders Walls, Doors and Trim is a premium quality acrylic based product with an eggshell finish. Suitable for interior wood, metal & plaster and areas of high moisture, such as kitchens & bathrooms. Also suitable for use on wallboards, concrete, cement rendering, brickwork & blockwork in internal situations. Formulated with an...
Mathys Fassithane Satin is a clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins that can be used indoors and outdoors and is solvent based giving excellent durability. Quick drying Does not yellow Scratch and wear resistant No tendency to wrinkle when applying thick layers Use indoors and...
A high quality, quick drying, non yellowing acrylic polyurethane satin enamel for interior and exterior use on timber, metals, plastics, masonry, previously painted surfaces and more.
Ardenbrite Metallic Paint (Water Based) is a beautiful and hardwearing water-borne metallic finish for interior and exterior use. The solvent-based finish with more gold, silver and bronze shades is available at Rawlins Paints, here.
Teamac Danish Oil, is hard, durable, water resistant seal for the enhancement of interior and exterior wood containing tung oil. Advantages Can be used for kitchen worktops, wooden panels, garden furniture and doors. Ideal to provide a more natural appearance on timber. Click to jump down to Technical Data
A waterborne acrylic satin gloss paint for interior and exterior woodwork, both bare and previously painted. Pegacryl Satin has weather resistance better than most synthetic enamels and can also be used as a topcoat for Noxyde. Good flow Quick drying Good filling power High covering capacity
Mathys Fassithane Gloss is a clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins that can be used indoors and outdoors and is solvent based giving excellent durability. Quick drying Does not yellow Scratch and wear resistant No tendency to wrinkle when applying thick layers
For commercial or domestic use, on floors, stairs, panelling etc. Timberex Coloured penetrates deeply into the wood filling the pores to form a wear and water resistant surface.
Coo-Var Polyurethane varnish is a single pack product of exceptional durability based on urethane alkyd. For interior use only. Product Features For Interior Use Suitable Surfaces: Wood Finish: Matt Application: Roller or brush Drying time: Touch Dry 2 hours or 12 hours hard dry Overcoat time: 12 hours or overnight Estimated...
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s...
Mathys Fassilux Aqua XPE Matt is a water based, scratch resistant matt finish for interior timber and previously painted mineral surfaces. Specially designed for interior use Quick drying Low in odour and VOC Easy to apply Excellent flow and levelling characteristics Superior scratch resistance Stable gloss Good adherence Hiding...
A durable and high performance acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for structural steel, as well as other exterior and interior uses. Top Features Smooth, attractive, high build finish Excellent corrosion protection Meets most VOC...
Tor Matt Black is a general purpose matt finish for blackboards, interior wrought iron work, dark rooms, welding booths etc. See further below for preparation for use on bare wood and previously-painted surfaces. Available in 3 sizes Good coverage - up to 12.5 square metres per litre Apply by brush, roller (short pile) or air spray An...