HMG Acid Cat AC 3000 Lacquer is a medium - high solids acid catalysed system offering outstanding build, exceptionally fast dry, excellent colour retention and low formaldehyde content.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
| 2-Pack System Details | |||||
|---|---|---|---|---|---|
| Base (Part 1) | HMG Acid Cat AC 3000 Lacquer | ||||
| Hardener (Part 2) | HMG Acid Cat AC 3000 Hardener | ||||
HMG Acid Cat AC 3000 Lacquer is a medium - high solids acid catalysed system offering outstanding build, exceptionally fast dry, excellent colour retention and low formaldehyde content.
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Acid Cat AC 3000 Hardener.
| Technical Data | ||||
|---|---|---|---|---|
| AC 3000 Matt | AC 3000 Gloss | AC 3000 20% | AC 3000 40% | |
| Volume Solids: | 46.3 % | 43.7 % | 49.7 % | 45.7 % |
| VOC Content: | 0.560kgs/ltr | 0.560kgs/ltr | 0.560kgs/ltr | 0.560kgs/ltr |
| SG: | - | - | - | - |
| Viscosity: | Kinematic - 26 s (DIN 53211/4) | Kinematic - 24 s (DIN 53211/4) | Kinematic - 24 s (DIN 53211/4) | 24 mPas |
| Density: | 0.98 g/cm³ | 0.98 g/cm³ | 0.98 g/cm³ | 0.98 g/cm³ |
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
| Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. |
| Pot Life: | Approx 24 hours @ 20°C | Approx 24 hours @ 20°C | Approx 24 hours @ 20°C | Approx 24 hours @ 20°C |
| Flash Point: | 13°C | 13°C | 13°C | 12°C |
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Compliant Spray Gun: | 35 μm approx | 70 μm per coat approx | |
| Pressure Pot: | 35 μm approx | 70 μm per coat approx | |
| Airless/Air-Assisted: | 35 μm approx | 70 μm per coat approx | |
Coverage: 10-12 square metres per litre @ 35 microns dft (theoretical).
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 15 minutes |
| Dry To Recoat: | Minimum 1 hour at 20°C, maximum 4 hours at 20°C |
| Fully Cured: | 24 hours |
| Technical Data | |||||
|---|---|---|---|---|---|
| Compliant Spray Gun | Pressure Pot | Airless/Air-Assisted | |||
| Mixing Ratio: | Base: 9 | Base: 9 | Base: 9 | ||
| Activator: 1 | Activator: 1 | Activator: 1 | |||
| Hardener Options: | Acid Cat AC 3000 Hardener | Acid Cat AC 3000 Hardener | Acid Cat AC 3000 Hardener | ||
| - | - | - | |||
| Viscosity: | 28 - 32 seconds B4 cup | 28 - 32 seconds B4 cup | 28 - 32 seconds B4 cup | ||
| Spray Gun Setup: | 1.4 - 1.8 | 1.2 - 1.4 | 11 - 13 thou/40 - 50° | ||
| Number Of Coats (Guide Only): | 2 full coats | 2 full coats | 1 full coat | ||
| Flash Off: | 5 - 10 minutes between coats | 15 minutes between coats | - | ||
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
| Information on basic physical and chemical properties | ||||
|---|---|---|---|---|
| AC3000 Matt | AC3000 Gloss | AC3000 20% | AC3000 40% | |
| Form: | Liquid | Liquid | Liquid | Liquid |
| Colour: | According to product specification | According to product specification | According to product specification | According to product specification |
| Odour: | Characteristic | Characteristic | Characteristic | Characteristic |
| Odour Threshold: | Not determined | Not determined | Not determined | Not determined |
| pH-value 20°C: | Not determined | Not determined | Not determined | Not determined |
| Melting point/freezing point: | Undetermined | Undetermined | Undetermined | Undetermined |
| Initial boiling point and boiling range: | 78°C | 75°C | 78°C | 75°C |
| Flash Point: | 13°C | 13°C | 13°C | 12°C |
| Flammability (solid, gas): | Not applicable | Not applicable | Not applicable | Not applicable |
| Ignition temperature: | 370°C | 415°C | 370°C | 370°C |
| Decomposition temperature: | Not determined. | Not determined. | Not determined. | Not determined. |
| Auto-ignition temperature: | Product is not selfigniting | Product is not selfigniting | Product is not selfigniting | Product is not selfigniting |
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
| Explosion limits: Lower: | 3.0 Vol % | 1.2 Vol % | 3.0 Vol % | 3.0 Vol % |
| Explosion limits: Upper: | 15.0 Vol % | 15.0 Vol % | 15.0 Vol % | 15.0 Vol % |
| Vapour pressure at 20°C: | 59 hPa | 59 hPa | 59 hPa | 59 hPa |
| Density at 20°C: | 0.98 g/cm³ | 0.98 g/cm³ | 0.98 g/cm³ | 0.98 g/cm³ |
| Relative density: | Not determined | Not determined | Not determined | Not determined |
| Vapour density: | Not determined | Not determined | Not determined | Not determined |
| Evaporation rate: | Not determined | Not determined | Not determined | Not determined |
| Solubility in / Miscibility with water: | NOT MISCIBLE | NOT MISCIBLE | NOT MISCIBLE | NOT MISCIBLE |
| Partition coefficient: n-octanol/water: | Not determined | Not determined | Not determined | Not determined |
| Viscosity: Dynamic at 20°C: | 1500 mPas | 1500 mPas | 1500 mPas | 1500 mPas |
| Viscosity: Kinematic: | 26 s (DIN 53211/4) | 24 s (DIN 53211/4) | 24 s (DIN 53211/4) | 24 mPas |
| Solvent content: Organic solvents: | 55.2% | 57.9% | 51.7% | 56.0% |
| Solids content: | 46.3% | 43.7% | 49.7% | 45.7% |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG Acid Cat AC 3000 Lacquer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Acid Cat AC 3000 Hardener is an acid catalyst/hardener for use in recommended HMG woodfinishes. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG Acid Cat AC 3000 LacquerHardener (Part 2) HMG Acid Cat AC 3000 Hardener...
£39.74 (incl. VAT)
£33.12 (ex. VAT)
