Coo-Var Matt Black (Solvent Based)
Coo-Var Matt Black is an oil based flat black finish for interior and exterior tudor beams, fires places, wrought ironwork, photographic dark rooms, anywhere a non-reflective surface is required.
Coo-Var Matt Black is an oil based flat black finish for interior and exterior tudor beams, fires places, wrought ironwork, photographic dark rooms, anywhere a non-reflective surface is required. Can also be used on chalk boards.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||9m² per litre|
|Touch Dry||2 Hours|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close