General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
Coo-Var P101 2 Pack Polyurethane Varnish
Coo-Var P101 2 Pack Polyurethane Varnish is a clear aliphatic polyurethane coating which provides a hard wearing protective coating for wooden floors, both inside or outside.
- For interior and exterior use
- Suitable surfaces: Wood
- Finish: Gloss
- Application: Roller, brush or airless spray
**Available for delivery - see Delivery Options below**
Coo-Var P101 2 Pack Polyurethane Varnish is a clear aliphatic polyurethane coating which provides a hard wearing protective coating for wooden floors, inside or outside.
It is designed to be used on wooden floors which experience heavy foot traffic. Is ideal for gymnasiums, dance floors or anywhere a hard wearing finish is required. Can be used over compatible water based paints to provide a glaze over a colour.
All surfaces should be clean, dry, sound and free from contaminants. Wood should be sanded prior to coating to ensure an adequate "key" is produced. Not for use over conventional solvent based varnishes.
The product is supplied in two containers: one larger than the other and labelled Base. The other smaller one labelled Hardener.
The contents of the pack marked Hardener are added to the contents of the larger pack marked Base and thoroughly mixed together, preferably by slow speed electric mixer for 2 minutes or until thoroughly mixed. Failure to mix the material correctly will lead to uncured areas in the coating.
Apply within 5 to 30°C by brush or short nap mohair roller. This product can also be spray applied in approved conditions. When brush or roller applied at ambient temperatures - these products do not emit free Isocyanate at above levels recommended by C.O.S.H.H. Regulations. However, the protective measures shown on the product labels and safety data sheets must be followed.
When used at elevated temperatures or atomised (sprayed) these products do emit small amounts of free Isocyanate and should only be sprayed in an atmosphere controlled working area, with suitable ventilation or flame proof extraction of air. Operatives must wear suitable protective clothing and separate air fed breathing apparatus. It is recommended that spraying of these products be avoided wherever possible to facilitate uncomplicated application and site conditions.
Coo-Var P101 2 Pack Polyurethane Varnish.
Not for use over conventional solvent based paints or varnishes.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
- Interior / Exterior Use
- Interior and Exterior
- Water / Solvent Based
- For Use On
- Application Method
- Brush, Roller
- Single, Two or Three Pack
- Pack Size
- Dry to Recoat (at 20°C)
- 16 hours
- 8m² per KG
- Recommended Thinner/Cleaner
- Do not thin
- Solids by Volume
- Touch Dry
- 3-4 Hours
- Recommended Dry Film Thickness
- 65-75 microns
- Recommended Wet Film Thickness
- 120-135 microns
- UN Number
- UN1993, UN1866
Be the first to ask a question about this product!