Rubio Monocoat Oil Varnish 2C

    Rubio5769

    We no longer stock this product, but can recommend Rubio Monocoat SheenPlus as a great alternative.

    Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

    Rubio Monocoat Oil Varnish 2C is a 2-pack, solvent-and-water-free oil that can be used to give a long-lasting satin finish to wooden surfaces oiled with Rubio Monocoat. Creates a scratch-free layer on top of the RMC Oil Plus 2C, which creates a warm, deep finish.

    • In one single coat - No overlaps - High coverage - Scratch-free results
    • Easy to restore with RMC Oil Varnish 2C for on-site restoration and with RMC Oil Plus 2C for mechanical damage
    • Based on natural ingredients, 0% VOC - 100% active substance
    • To be applied with a polishing machine with pad
    • Always needs to be used in combination with RMC Oil Plus 2C

    Quantity
    Product not available
    This Product has been Discontinued

    Description

    Rubio Monocoat Oil Varnish 2C is a solvent- and water-free oil that can be used to give a long- lasting satin finish to wooden surfaces oiled with RMC. RMC Oil Varnish 2C creates a scratch- free layer on top of the RMC Oil Plus 2C, which creates a warm, deep finish.

    In contrast to water-based varnishes, RMC Oil Varnish 2C can be applied with a polishing machine with pad. In addition, when the gloss begins to disappear, the RMC Varnish can be restored, either manually or with a polishing machine. If the colour of the surface also needs to be restored, this can be done with RMC Oil Plus 2C, in the colour the surface was originally treated with.

    Certified 0% VOC

     

    • An independent laboratory (Ecca) has subjected this product to gaschromatography tests to help determine the VOC level



    Features & Benefits


    • In one single coat
    • No overlaps
    • High coverage
    • Scratch-free results
    • Easy to restore with RMC Oil Varnish 2C for on-site restoration and with RMC Oil Plus 2C for mechanical damage
    • Based on natural ingredients, 0% VOC
    • To be applied with a polishing machine with pad
    • 100% active substance
    • Solvent- and water-free oil



    Important


    The product must NOT be diluted under any circumstances.

    Cloths that are soaked in oil may spontaneously combust and must therefore be submerged in water after use.



    Tips


    For an optimal result, it is obligatory to add RMC Accelerator (B) in the correct ratio to the RMC Oil Varnish 2C (A).

    It is very important to respect the minimum drying time of 48 hours, between applying the RMC Oil Plus 2C and the RMC Oil Varnish 2C. If the RMC Oil Plus 2C is not dry enough, there is a risk of depigmentation occurring while rubbing in the RMC Oil Varnish 2C.

    RMC Oil Varnish 2C must always be applied with a polishing machine for on-site application and must never be applied with a standard lacquer roller.

    During the first week after application of the RMC Oil Varnish 2C, only clean with dry cloth. After that, you may clean with moisture, using the RMC Surface Care or RMC Soap.



    Product Details
    Rubio5769

    Data sheet

    Manufacturer
    Rubio Monocoat
    Interior / Exterior Use
    Interior Use
    Water / Solvent Based
    Hybrid
    For Use On
    Prepared
    Application Method
    Cloth, Brush, Sponge
    Colour
    Clear
    VOC Levels
    Ultra-Low (5-49 g/l)
    Single, Two or Three Pack
    Two-Pack
    Single, Two or Three Pack
    Two-Pack
    Pack Size
    350ml, 1.3L, 5.5L
    Mixing Ratio
    3 units of A to 1 unit of B
    Coverage
    160 m²/L
    Density
    approx. 1.05 kg/L
    VOC
    0 g/L
    Shelf Life (from date of manufacture)
    12 months
    Drying time
    24 hours before traffic
    Dry to Recoat
    48 hours
    Flashpoint
    60°C
    Suitable For Use On
    Interior Wood
    Finish
    Satin
    Application Method
    Brush
    Application Method
    Sponge
    Application Method
    Cloth
    Product Usage Type
    Wood Finish
    Type of Wood Finish
    Wood Varnish
    Suitable For
    Walls & Ceilings
    Colour Family
    Clear
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Rubio Monocoat Oil Varnish 2C is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT