Coo-Var Matt Black (Water Based)
Coo-Var Matt Black Water Based is a high opacity flat black acrylic coating providing a finish to internal surfaces anywhere a non-reflective surface is required.
- Less odours than solvent-based
- Fast drying
- Apply directly to wood and masonry
- Can be used on cement
- Available in sizes from 500ml up to 5L
**Available for delivery - see Delivery Options below**
Coo-Var Water Based Matt Black is a high opacity flat black acrylic coating. Coo-Var Water Based Matt Black provides a flat black finish in dark rooms. Good on beams, wrought iron work or cement and masonry where a matt black finish is required.
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Use Coo-Var Masonry Stabiliser on unstable brick, screed or plaster prior to painting. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Do not paint when temperature will be at or below 7°C during the painting and drying process.
Apply direct on to wood and concrete. On metal use Coo-Var Water Based All Metals Primer.
Coo-Var Water Based Matt Black.
Do not paint when temperature will be at or below 7 deg C during the painting and drying process.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
- Interior / Exterior Use
- Interior and Exterior
- Water / Solvent Based
- For Use On
- Application Method
- Brush, Roller
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Pack Size
- 500ml, 1L, 2.5L, 5L
- 10m² per litre
- Recommended Thinner/Cleaner
- Solids by Volume
- Touch Dry
- 30 Mins
- Recommended Dry Film Thickness
- 35-40 microns
|Sian Williams on 2021-03-14 18:05:30|| |
Can you use exterior
No this paint is designed for internal use only, but Coo-Var Matt Black (Solvent Based) can be used externally.
|Thomas on 2020-05-13 13:53:11|| |
Can this be applied using a spray gun?
This paint is for brush or roller application only.