Blackfriar Multi-Surface Primer has been specially formulated to prime multiple surfaces prior to further painting. It’s ideal for hard and soft woods, chipboard, plywood, GRP, MDF, exterior UPVC, ceramic tiles, iron, steel, galvanised and non-ferrous metals (aluminium, brass, chrome, copper) and old plaster. Product Features Interior and...
Blackfriar Matt Black Paint
Blackfriar Matt Black Paint is a matt black non-reflective paint which is ideal for interior metal, wood and plaster. Recommended for timber beams, iron work, stage scenery and darkrooms. A practical and versatile product.
- Matt black.
- Interior use.
- For wood, metal and plaster.
Blackfriar Matt Black Paint is perfect if you need a dead black matt surface. Its non-reflective finish makes it ideal for all interior surfaces such as old beams, panelling, decorative ironwork, stage scenery and darkrooms. It can be used on wood and metal.
Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination. Previously painted surfaces in sound condition should be abraded and degreased prior to direct application of Blackfriar Matt Black Paint. Remove any rust and abrade back to a clean bright surface before priming with the appropriate Blackfriar Metal Primer. New or other bare surfaces should be primed with the appropriate Blackfriar primer.
Stir thoroughly prior to use with a broad stirrer. The product may be applied by brush, roller or spray. Two coats are recommended to give the best protection.
Do not use under cold (less than 5°C), damp or humid conditions. Matt paints are not as durable as satin/gloss paints when used externally. We recommend that Blackfriar Matt Black Paint is only used on small areas externally. For larger areas we would strongly recommend the use of Blackfriar Satin Black Paint. Not suitable for direct application to galvanised metal, use Blackfriar MultiSurface Primer first.
Hard dry in 16 hours. Recoat after 16 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.
Remove as much product as possible from application equipment before washing with white spirit. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.
Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.
Features & Benefits
- For wood, metal and plaster
- Interior use
- Matt finish
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Blackfriar Professional
- Base Type
- Solvent Based
- Interior/Exterior Use
- Brush, Roller, Spray
- Up to 14m² per litre per coat
- Recommended Thinner/Cleaner
- Do Not Thin
- Touch Dry
- 16 Hours
- UN Number
Be the first to ask a question about this product!
Blackfriar Satin Black is an attractive, hard-wearing, black satin finish for metal and wood. Ideal for old beams, wrought ironwork, gates, railings, doors, skirting and steel fabrications. Product Features Black satin finish. Interior / exterior. Hard-wearing and durable. Designed for metal and wood. Ideal for gates, railings and...