Blackfriar Quick Drying Varnish transforms your interior wooden surfaces. Available in a range of five natural shades, it provides a hardwearing, quick-drying finish. For all types of interior wood Tough and durable Easy to clean water-based formulation Apply via brush, roller or spray Quick drying - touch dry in just 1 hour and...
Coo-Var Eggshell is an interior and exterior oil-based finish for primed wood, metal and masonry that dries to a white eggshell finish.
- Interior/Exterior use
- Eggshell/Satin finish
- Suitable for wood, metal or masonry
- Off-white finish
- Great for Tudor brickwork and beams
Coo-Var Eggshell is an interior and exterior oil-based finish for primed wood, metal and masonry. Dries to a white eggshell finish.
All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance.
New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate. Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.
As dictated by normal good painting practice. In confined spaces provide adequate ventilation during application and drying.
Coo-Var Satin Finish
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Base Type
- Brush, Roller
- 13m² per litre
- Recommended Thinner/Cleaner
- Do not thin
- Solids by Volume
- Touch Dry
- 4 Hours
- UN Number
Be the first to ask a question about this product!
Timberex Wax-Oil greatly enhances colours and grain and allows wood to age naturally into rich varying tones. Made from fast curing natural oils and carnuba wax it cures to a deep satin finish.
Blackfriar Matt Black Paint is a matt black non-reflective paint which is ideal for interior metal, wood and plaster. Recommended for timber beams, iron work, stage scenery and darkrooms. A practical and versatile product. Product Features Matt black. Non-reflective. Interior use. For wood, metal and plaster.
Timberex Aqua Plus is a water-based polymer wood coating for fast and easy industrial protection. Very rapid curing saves time and costs. Stains and protects at the same time. Coverage Calculator
Mathys Fassilux Aqua XPE Satin is a water based, satin finish for interior and exterior timber and previously painted mineral substrates to provide a smooth, scratch resistant finish. Can be used in- and exterior Quick drying Low in odour and VOC, Easy to apply Excellent flow and levelling characteristics Superior scratch resistance...
Blackfriar Raw Linseed Oil penetrates deep into wood, nourishing it from within. It is ideal for oak beams, cricket bats and bean canes. Nourishes and protects all wood Penetrates deep into wood Suitable for most woods Interior and exterior use Can also be used for softening glazing putty Applies by brush or rag Good coverage of up to...
A range of water-based stains for interior use that penetrate deep into the wood for a lasting colour effect without losing the ‘wood’ look. The stains are fastdrying, allowing the topcoat to be applied within a few hours, minimizing time and costs.
Coo-Var Matt Black Water Based is a high opacity flat black acrylic coating providing a finish to internal surfaces anywhere a non-reflective surface is required. Product Features Water-based Less odours than solvent-based Fast drying Non-reflective Decorative Apply directly to wood and masonry Can be used on cement
Blackfriar High Gloss Paint is specially formulated to provide a hard-wearing finish with increased flexibility meaning it lasts longer than ordinary gloss paints. It is tough and durable, and can be used on internal and external surfaces. Product Features For metal, wood, plaster and more Long lasting finish Tough & durable...
Coo-Var Acrylic Varnish is a water based clear gloss varnish. An ideal alternative to solvent based products. For inside use only. Product Features Quick drying Safer alternative to solvent-based products Gloss & Eggshell finishes Interior use Four tin sizes available
Designed for thick section repairs, haunching reinstatements, ironwork backfilling and commerical sign/post installation. HAPAS Approved since 2005 20N/mm² compressive Rapid set: 10-20 minutes strength in 2 hours Open to traffic: 2 hours • Shrinkage compensated
Thermilate InsOpaint Gloss is an innovative, eco-friendly, water based gloss paint with a non-yellowing finish, ideal for interior wood and metal. This specially formulated, water based gloss gives all the appearance and characteristics of traditional gloss but has advanced durability, high opacity and fast drying times. Coverage Calculator
Blackfriar French Polish provides a classic fine finish for wood. It is suitable for new, stained, or previously French Polished wood and brings out the natural beauty of wooden surfaces. Fast drying times - Touch dry in 15 - 30 minutes. Recoat after 1 hour. Interior use High gloss, fine finish Shellac based Recoat after 1 hour Use on...
HMG Acid Cat MB Colours. A high solids, compliant system designed for application onto wood substrates offering fast drying and excellent colour retention. Available in a wide range of RAL and BS colours. Click to jump down to Technical Data
A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.