Coo-Var Danish Oil is a hard, durable, water resistant seal for the enhancement of interior and exterior wood containing tung oil. Product Features Harder finish than teak oil Durable Water resistant Slight gloss finish
Coo-Var Gloss is a top quality oil based coating with excellent opacity. Dries to a high gloss finish.
Ideal Uses :
- Suitably primed metal
- GRP doors
- Benches and trim
- For interior and exterior use
- 2010 Compliant
Coo-Var Gloss is a top quality oil based coating with excellent opacity. Dries to a high gloss finish. Coo-Var Gloss is ideal for use on suitably primed metal, wood and GRP doors, frames, pipes, benches and trim. For interior and exterior use.
All surfaces should be clean, dry, sound and free from contaminants. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination. In confined spaces, provide adequate ventilation during application and drying.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Base Type
- Brush, Roller
- 14m² per litre
- Recommended Thinner/Cleaner
- Thinner 14
- Solids by Volume
- Touch Dry
- 6 Hours
- Recommended Dry Film Thickness
- 50-55 microns
- Recommended Wet Film Thickness
- 100 microns
- UN Number
Be the first to ask a question about this product!
Blackfriar Danish Oil penetrates deep into the wood for a beautiful and long lasting finish. Ideal for wooden surfaces inside and outside the home. Product Features Interior and exterior use. Satin finish. Penetrates deep into wood. Nourishes and protects wood. For all hard and soft woods.
Coo-Var Polyurethane varnish is a single pack product of exceptional durability based on urethane alkyd. For interior use only. Product Features For Interior Use Suitable Surfaces: Wood Finish: Matt Application: Roller or brush Drying time: Touch Dry 2 hours or 12 hours hard dry Overcoat time: 12 hours or overnight Estimated...
Mathys Fassilux Aqua XPE Gloss is a water based, scratch resistant finish on properly prepared wooden or other already painted mineral substrates for interior or exterior use. Quick drying Low in odour and VOC Easy to apply Excellent flow and levelling characteristics Superior scratch resistance Stable gloss Good adherence, hiding...
Teamac Danish Oil, is hard, durable, water resistant seal for the enhancement of interior and exterior wood containing tung oil. Advantages Can be used for kitchen worktops, wooden panels, garden furniture and doors. Ideal to provide a more natural appearance on timber. Click to jump down to Technical Data
Designed for thick section repairs, haunching reinstatements, ironwork backfilling and commerical sign/post installation. HAPAS Approved since 2005 20N/mm² compressive Rapid set: 10-20 minutes strength in 2 hours Open to traffic: 2 hours • Shrinkage compensated
Coo-Var Siliconised Teak Oil is a blend of natural oils and silicone derivatives to enhance, preserve and restore the appearance of teak and other hardwoods. Good degree of resistance to water Can be used inside or outside Oil takes better to hardwood than traditional varnish Good on teak and other hardwoods Ideal for use on outdoor...
Blackfriar French Polish provides a classic fine finish for wood. It is suitable for new, stained, or previously French Polished wood and brings out the natural beauty of wooden surfaces. Fast drying times - Touch dry in 15 - 30 minutes. Recoat after 1 hour. Interior use High gloss, fine finish Shellac based Recoat after 1 hour Use on...
Blackfriar High Gloss Paint is specially formulated to provide a hard-wearing finish with increased flexibility meaning it lasts longer than ordinary gloss paints. It is tough and durable, and can be used on internal and external surfaces. Product Features For metal, wood, plaster and more Long lasting finish Tough & durable...
Coo-Var Acrylic Varnish is a water based clear gloss varnish. An ideal alternative to solvent based products. For inside use only. Product Features Quick drying Safer alternative to solvent-based products Gloss & Eggshell finishes Interior use Four tin sizes available
HMG Acid Cat AC 3000 Lacquer is a medium - high solids acid catalysed system offering outstanding build, exceptionally fast dry, excellent colour retention and low formaldehyde content. Developed to meet the requirements of FIRA Standard 6250:2005 for horizontal surfaces (excluding kitchen worktops). Low Formaldehyde Available in a range of clear,...
Ardenbrite Metallic Paint (Solvent Based) is a lustrous, metallic finish for the redecoration of props, artefacts, statues, emblems, lamps, vases, metal furniture and mirrors. The water-based finish is also available, here.
HMG Acid Cat MB Colours. A high solids, compliant system designed for application onto wood substrates offering fast drying and excellent colour retention. Available in a wide range of RAL and BS colours. Click to jump down to Technical Data
Tor Matt Black is a general purpose matt finish for blackboards, interior wrought iron work, dark rooms, welding booths etc. See further below for preparation for use on bare wood and previously-painted surfaces. Available in 3 sizes Good coverage - up to 12.5 square metres per litre Apply by brush, roller (short pile) or air spray An...