Blackfriar Boiled Linseed Oil Penetrates deep into wood, providing an attractive ruby tint with a light gloss finish. Blackfriar Boiled Linseed Oil can be used inside and outside and is ideal for bare woods except oak, and is also useful for softening metal glazing putty. Product Features Interior and exterior use. Nourishes and protects...
Coo-Var Teak Oil
Coo-Var Siliconised Teak Oil is a blend of natural oils and silicone derivatives to enhance, preserve and restore the appearance of teak and other hardwoods.
- Good degree of resistance to water
- Can be used inside or outside
- Oil takes better to hardwood than traditional varnish
- Good on teak and other hardwoods
- Ideal for use on outdoor furniture
Coo-Var Siliconised Teak Oil is a blend of natural oils and silicone derivatives to enhance, preserve and restore the appearance of teak and other hardwoods. It has a good degree of resistance to water and can be used inside or outside. The oil takes better to hardwood than traditional varnish. Coo-Var Siliconised Teak Oil is used on teak and other hardwoods, ideal for use on outdoor furniture.
All surfaces should be clean, dry, sound and free from contaminants. Ensure the surface is left to dry for 1 to 2 weeks. Use sandpaper to remove any unwanted old coatings or paints.
Mix well before use.
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.
Coo-Var Siliconised Teak Oil.
Apply as a flood coat, work well into the grain, taking particular care at "end" grains.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Base Type
- Brush or cloth
- 7m² per litre
- Recommended Thinner/Cleaner
- Thinners 14
- Solids by Volume
- Touch Dry
- 8 Hours
- UN Number
Be the first to ask a question about this product!
Ardenbrite Metallic Paint (Water Based) is a beautiful and hardwearing water-borne metallic finish for interior and exterior use. The solvent-based finish with more gold, silver and bronze shades is available at Rawlins Paints, here.
Zanders Walls, Doors and Trim is a premium quality acrylic based product with an eggshell finish. Suitable for interior wood, metal & plaster and areas of high moisture, such as kitchens & bathrooms. Also suitable for use on wallboards, concrete, cement rendering, brickwork & blockwork in internal situations. Formulated with an...
Blackfriar Wood Dye penetrates deep into wood to enrich the colour of bare timber. It can be used on new interior and exterior timber, plywood and chipboard. Plus you can also mix the dye colours to create your own individual shades. Available In 9 wood shades Ideal for new and bare timber. Great for plywood and chipboard....
A high quality, quick drying, non yellowing acrylic polyurethane satin enamel for interior and exterior use on timber, metals, plastics, masonry, previously painted surfaces and more.
For commercial or domestic use, on floors, stairs, panelling etc. Timberex Coloured penetrates deeply into the wood filling the pores to form a wear and water resistant surface.
A high quality, quick drying, non yellowing acrylic polyurethane gloss enamel for interior and exterior use on timber, metals, plastics, masonry, previously painted surfaces and more.
Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...
Mathys Fassithane Satin is a clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins that can be used indoors and outdoors and is solvent based giving excellent durability. Quick drying Does not yellow Scratch and wear resistant No tendency to wrinkle when applying thick layers Use indoors and...
Coo-Var Polyurethane varnish is a single pack product of exceptional durability based on urethane alkyd. For interior use only. Product Features For Interior Use Suitable Surfaces: Wood Finish: Matt Application: Roller or brush Drying time: Touch Dry 2 hours or 12 hours hard dry Overcoat time: 12 hours or overnight Estimated...
Ardenbrite Metallic Paint (Solvent Based) is a lustrous, metallic finish for the redecoration of props, artefacts, statues, emblems, lamps, vases, metal furniture and mirrors. The water-based finish is also available, here.
Blackfriar High Gloss Paint is specially formulated to provide a hard-wearing finish with increased flexibility meaning it lasts longer than ordinary gloss paints. It is tough and durable, and can be used on internal and external surfaces. Product Features For metal, wood, plaster and more Long lasting finish Tough & durable...
A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.
Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.