Coo-Var Danish Oil
  • Coo-Var Danish Oil

Coo-Var Danish Oil


Coo-Var Danish Oil is a hard, durable, water resistant seal for the enhancement of interior and exterior wood containing tung oil.

Product Features

  • Harder finish than teak oil
  • Durable
  • Water resistant
  • Slight gloss finish

VAT excluded

£21.08 Tax incl.


Coo-Var Danish Oil is a hard, durable, water resistant seal for the enhancement of interior and exterior wood. Contains tung oil. Coo-Var Danish Oil is ideal for use on mahogany, teak and most other timbers. Great on kitchen worktops, wooden panels, garden furniture and doors.

Recommended Uses

  • Mahogany
  • Teak
  • Timber
  • Kitchen worktops
  • Wooden panels
  • Garden furniture
  • Doors

Surface Preparation

Ensure the surface is clean, dry and free from wax, oil, grease and dirt. Use sandpaper to remove any unwanted old coatings and paints.

Application Conditions

As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.

Preceding Coat

Coo-Var Danish Oil direct to prepared wood.

Subsequent Coat

Coo-Var Danish Oil

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Interior / Exterior Use
Interior and Exterior
Water / Solvent Based
For Use On
Mahogany, Teak, Unprepared, Prepared
Application Method
Bruch, Cloth
Single, Two or Three Pack
Pack Size
1L, 2.5L
14m² per litre
Recommended Thinner/Cleaner
Thinners 14
Solids by Volume
Touch Dry
4 Hours
Recommended Dry Film Thickness
35 microns
Recommended Wet Film Thickness
70 microns
UN Number

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields