A range of water-based stains for interior use that penetrate deep into the wood for a lasting colour effect without losing the ‘wood’ look. The stains are fastdrying, allowing the topcoat to be applied within a few hours, minimizing time and costs.
Bedec Crackle Glaze
Use to give furniture and other items a distressed look, produces a complex decorative finish like snakeskin or crocodile effects.
Bedec Crackle Glaze is one of the many methods used to give furniture and other items a distressed look, and produces a complex decorative finish like snakeskin or crocodile effects. These effects are dramatised when two strongly contrasting colours, such as black on white or red on black are used. Suitable for application to most substrates after appropriate preparation and priming.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Coo-Var Danish Oil is a hard, durable, water resistant seal for the enhancement of interior and exterior wood containing tung oil. Product Features Harder finish than teak oil Durable Water resistant Slight gloss finish
Zanders Walls, Doors & Trim is a premium quality acrylic based product with an eggshell finish. Suitable for interior wood, metal & plaster and areas of high moisture, such as kitchens & bathrooms. Also suitable for use on wallboards, concrete, cement rendering, brickwork & blockwork in internal situations. Formulated with an acrylic resin providing a...
Blackfriar Danish Oil provides a beautiful, low lustre satin, scratch-proof finish. You can use it inside and outside for most wooden surfaces including furniture, doors, panelling, wood decorations and woodturning.
Rust-Oleum 4900 Polycoat 2K is a clear, water-based, 2-component polyurethane topcoat for use on wood, concrete and pre-painted surfaces, also serves as an anti-graffiti coating. Very abrasion resistant, available in a matt or gloss finish, does not yellow, can be used internally and externally, resists boiling water, alcohol, coffee, red...
Designed for thick section repairs, haunching reinstatements, ironwork backfilling and commerical sign/post installation. HAPAS Approved since 2005 20N/mm² compressive Rapid set: 10-20 minutes strength in 2 hours Open to traffic: 2 hours • Shrinkage compensated
Coo-Var Siliconised Teak Oil is a blend of natural oils and silicone derivatives to enhance, preserve and restore the appearance of teak and other hardwoods. Good degree of resistance to water Can be used inside or outside Oil takes better to hardwood than traditional varnish Good on teak and other hardwoods Ideal for use on outdoor...
Perfect for when you need a dead black matt surface. Its non-reflective finish makes it ideal for all interior surfaces such as old beams, panelling, decorative ironwork, stage scenery and darkrooms. To be used on wood and metal.
Coo-Var Acrylic Varnish is a water based clear gloss varnish. An ideal alternative to solvent based products. For inside use only. Product Features Quick drying Safer alternative to solvent-based products Gloss & Eggshell finishes Interior use Four tin sizes available
Blackfriar Teak Oil protects and revives wood – especially hard woods, teak and Scandinavian furniture. Protects against weathering and greying by nourishing and feeding the wood.
Coo-Var Gloss is a top quality oil based coating with excellent opacity. Dries to a high gloss finish. Ideal Uses : Suitably primed metal Wood GRP doors Frames Pipes Benches and trim For interior and exterior use 2010 Compliant
Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.
Mathys Fassilux Aqua XPE Satin is a water based, satin finish for interior and exterior timber and previously painted mineral substrates to provide a smooth, scratch resistant finish. Can be used in- and exterior Quick drying Low in odour and VOC, Easy to apply Excellent flow and levelling characteristics Superior scratch resistance...