A virtually solvent-free product made from natural, fast-drying oils and resins which penetrate deeply into the wood. Filling and enriching the pores it cures to seal and protect from within
Coo-Var Polyurethane Clear Floor Coating
Coo-Var Polyurethane Clear Floor Coating is an oil based clear wood floor varnish which gives a hard glaze to protect most wooden floors and provide an easy to clean surface.
Coo-Var Polyurethane Clear Floor Coating is an oil based clear wood floor varnish which gives a hard glaze to protect most wooden floors and provide an easy to clean surface. Coo-Var Polyurethane Clear Floor Coating gives excellent performance for an air drying product.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.
A range of water-based grey stains that penetrate deep into the wood for a lasting grey ‘weathered wood’ look. Only need to apply once, then a topcoat can be applied.
Coo-Var P101 2 Pack Polyurethane Varnish is a clear aliphatic polyurethane coating which provides a hard wearing protective coating for wooden floors, inside or outside.
Coo-Var Clear Glaze for Wooden Floors is a water-thinned, fast drying, low odour coating ideal for wooden floors to provide a quick drying and protective clear coat. ADVANTAGES Quick drying Protective, clear coat Domestic/Commercial use Low odour
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s Resistant...
Used for periodic maintenance of floors treated with Timberex Natural, Timberex Heavy Duty or Timberex Coloured. Available in natural or white, re-sanding is not normally necessary.
A range of water-based stains for interior use that penetrate deep into the wood for a lasting colour effect without losing the ‘wood’ look. The stains are fastdrying, allowing the topcoat to be applied within a few hours, minimizing time and costs.
Blackfriar Heavy Duty Varnish is a two-pack wood and concrete varnish that protects and transforms floors and work surfaces with a tough, hard wearing and professional finish. Touch dry in 2 hours and hard dry in 8 hours, this product is for internal use.
Rust-Oleum Chalky Finish Floor Paint renovates and transforms wood, concrete and previously painted surfaces with a a hard wearing flat matt finish that is suitable for wooden floorboards or concrete flooring, resisting knocks and scratches. Water based with virtually no odour Highly concentrated, with exceptional coverage - Up to 14m2 /...