Lacq Parquet Varnish

LAQ1005

Lacq Parquet Varnish is a strong urethane acrylate-based varnish for hardwood and parquet floors with an extremely high wear resistance.

  • Also suitable for wooden furniture and stairs
  • Easy to apply
  • Very high wear resistance, even with intensive use
  • Can be used on any type of wood, solid or veneer
  • Available in Invisible (Matt) and Satin (Satin Gloss)
  • Does not yellow
  • Water-based and low odour
  • 32% volume solids content
  • Recoatable (at 20°C and 40-65% RH) after 1.5 - 2 hours
  • Fully dry in 24 hours and
  • Fully hardened after 7 days (cleanable)

**Available for delivery - see Delivery Options below**

Colour
Size
Finish
£68.04
VAT excluded

£81.65 Tax incl.
Quantity

Description

Lacq Parquet Varnish is an extremely strong urethane acrylate-based varnish for hardwood and parquet floors with extremely high wear resistance. It can also be used on wood furniture and stairs.

Lacq Parquet lacquer is easy to apply and is recommended for wood floors that are used intensively.

After seven days the floor can be maintained with a mop, soap and water. For this, use Lacq Nourishing Floor Soap to guarantee an optimal lifetime of the protection.

Lacq Parquet Varnish can be used on any type of wood, solid or veneer.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Extremely strong urethane acrylate-based varnish for hardwood and parquet floors
  • High wear resistance
  • Easy to apply
  • Easy to maintain
  • Can be used on any type of wood, solid or veneer
  • Available in Invisible (Matt) and Satin (Satin Gloss)
  • Does not yellow
  • Water-based and low odour
  • Recoatable (at 20°C and 40-65% RH) after 1.5 - 2 hours
  • Fully dry in 24 hours
  • Fully hardened after 7 days (cleanable)



Substrate Requirements


Untreated Timber:

  • Thoroughly degrease floor with Fluxaf Proclean; degrease tropical wood varieties such as Teak, Wengé with a thinner
  • Sand the surface in the direction of the grain. Use a P120 - P150 grit for this purpose.
  • Sanding is not necessary, only when a smooth finish is required
  • After sanding, thoroughly vacuum remove any remaining dust

Treated Wood (other than with Lacq Parquet Varnish):

  • First, thoroughly remove all old lacquer, wax or oil layers, because these can have a negative effect on the adhesion and quality of the Lacq Parquet Varnish
  • This can be accomplished with the appropriate sanders and/or cleaning agents
  • Sand the surface in the direction of the grain use a P120 - P150 grit for this purpose
  • After sanding, thoroughly vacuum and remove all remaining dust



Coverage


  • Approximately 12-15m2 per litre, depending on type of wood, sanding method and method of application

Note: This coverage is indicative. Results are highly dependent on the type of wood, application and preparation. We recommend you set up a trial area to determine the exact coverage and result.



Application


Note: The product is ready for use and therefore should not be thinned.

Untreated Timber:

  • Thoroughly stir the product
  • The product can be applied with a roller, brush or spray
  • For maximum protection we recommend the application of 3 coats. It is recoatable after 1.5-2 hours
  • Lightly sand in between coats with a P220 or P320 grit
  • Always provide for proper ventilation

Treated Wood (other than with Lacq Parquet Varnish):

  • Thoroughly stir the product
  • The product can be applied with a roller, brush or spray
  • For maximum protection we recommend the application of 3 coats. It is recoatable after 1.5-2 hours
  • Lightly sand in between coats with a P220 or P240 grit
  • Always ensure proper ventilation



Cleaning


  • All tools used can be cleaned with water



Shelf Life


  • 12 months at between 5 and 35°C in its original unopened packaging



Health & Safety


  • Please refer to the safety data sheet
  • Avoid release into the environment
  • Wear protective gloves/ protective clothing/ eye protection/ face protection
  • Keep out of the reach of children

For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]



Product Details
LAQ1005

Data sheet

Manufacturer
Lacq
Interior / Exterior Use
Interior
For Use On
Wood
Application Method
Brush, Roller, Spray
Sheen
Matt, Semi Gloss
Colour
Clear
Single, Two or Three Pack
Single
Pack Size
2.5L
Base Type
Water
Dry to Recoat (at 20°C)
1.5 - 2 hours
Fully Cured (at 20°C)
7 days (cleanable)
Recommended Thinner/Cleaner
Water
Solids by Volume
32%
Shelf Life (from date of manufacture)
12 months at between 5 and 35°C in its original unopened packaging
UN Number
N/A

Specific References

ean13
8717853122231
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Lacq Nourishing Floor Soap

Lacq Nourishing Floor Soap is specially developed for cleaning and care of floors treated with Lacq Rapidoil 2C and is also suitable for cleaning all other water-repellent floors. Clean and care for your floor in one treatment Dries without streaks or residue, leaving a shiny, cared-for floor Suitable for all floors pH neutral and fully...

Price £9.92
In stock