Rust-Oleum Chalky Finish Floor Paint renovates and transforms wood, concrete and previously painted surfaces with a a hard wearing flat matt finish that is suitable for wooden floorboards or concrete flooring, resisting knocks and scratches. Water based with virtually no odour Highly concentrated, with exceptional coverage - Up to 14m2 /...
Coo-Var P101 2 Pack Polyurethane Varnish
Coo-Var P101 2 Pack Polyurethane Varnish is a clear aliphatic polyurethane coating which provides a hard wearing protective coating for wooden floors, both inside or outside.
- For interior and exterior use
- Suitable surfaces: Wood
- Finish: Gloss
- Application: Roller, brush or airless spray
Coo-Var P101 2 Pack Polyurethane Varnish is a clear aliphatic polyurethane coating which provides a hard wearing protective coating for wooden floors, inside or outside.
It is designed to be used on wooden floors which experience heavy foot traffic. Is ideal for gymnasiums, dance floors or anywhere a hard wearing finish is required. Can be used over compatible water based paints to provide a glaze over a colour.
All surfaces should be clean, dry, sound and free from contaminants. Wood should be sanded prior to coating to ensure an adequate "key" is produced. Not for use over conventional solvent based varnishes.
The product is supplied in two containers: one larger than the other and labelled Base. The other smaller one labelled Hardener.
The contents of the pack marked Hardener are added to the contents of the larger pack marked Base and thoroughly mixed together, preferably by slow speed electric mixer for 2 minutes or until thoroughly mixed. Failure to mix the material correctly will lead to uncured areas in the coating.
Apply within 5 to 30°C by brush or short nap mohair roller. This product can also be spray applied in approved conditions. When brush or roller applied at ambient temperatures - these products do not emit free Isocyanate at above levels recommended by C.O.S.H.H. Regulations. However, the protective measures shown on the product labels and safety data sheets must be followed.
When used at elevated temperatures or atomised (sprayed) these products do emit small amounts of free Isocyanate and should only be sprayed in an atmosphere controlled working area, with suitable ventilation or flame proof extraction of air. Operatives must wear suitable protective clothing and separate air fed breathing apparatus. It is recommended that spraying of these products be avoided wherever possible to facilitate uncomplicated application and site conditions.
Coo-Var P101 2 Pack Polyurethane Varnish.
Not for use over conventional solvent based paints or varnishes.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- Dry to Recoat (at 20°C)
- 16 hours
- 8m² per KG
- Recommended Thinner/Cleaner
- Do not thin
- Solids by Volume
- Touch Dry
- 3-4 Hours
- Recommended Dry Film Thickness
- 65-75 microns
- Recommended Wet Film Thickness
- 120-135 microns
- UN Number (Activator)
- UN Number (Base)
Be the first to ask a question about this product!
Used for periodic maintenance of floors treated with Timberex Gold, Timberex Free or Timberex Wax-Oil. A deep penetrating, hardening natural oil that is labour efficient and re-sanding is not normally necessary.
A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.
Timberex Aqua Plus is a water-based polymer wood coating for fast and easy industrial protection. Very rapid curing saves time and costs. Stains and protects at the same time. Coverage Calculator
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s...
A virtually solvent-free product made from natural, fast-drying oils and resins which penetrate deeply into the wood. Filling and enriching the pores it cures to seal and protect from within
Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.
Blackfriar Quick Drying Floor Varnish has been specially formulated to protect floors with an attractive, long-lasting scratch-resistant finish. The varnish dries quickly so you could transform your floors in just one day. Easy to clean and perfect for all wooden flooring. Product Features For all interior wooden doors. Scratch and...
Jotun Trestjerner Parkettlakk is a quick-drying, high quality, water-borne polyurethane clear varnish with low odours for use on wooden laminate/parquet floors. It has a high resistance to wear and scratches and a good chemical resistance. The product adheres well to the flooring enhancing the appearance, and it contains a UV-filter against...
Coo-Var Polyurethane Clear Floor Coating is a single pack product of exceptional durability based on urethane alkyd. Product Features Perfect for kitchen furniture Worktops Internal doors For interior use only
Mathys Plasti-Parket is a solvent based polyurethane alkyd varnish ideal for treating and protecting parquet floors and wooden stairs. Simple to use Air-drying Excellent resistance against abrasion Makes maintenance easier Suitable for spot repairs
For commercial or domestic use, on floors, stairs, panelling etc. Timberex Coloured penetrates deeply into the wood filling the pores to form a wear and water resistant surface.
Rust-Oleum 4900 Polycoat 2K is a clear, water-based, 2-component polyurethane topcoat for use on wood, concrete and pre-painted surfaces, also serves as an anti-graffiti coating. Very abrasion resistant, available in a matt or gloss finish, does not yellow, can be used internally and externally, resists boiling water, alcohol, coffee, red...
A range of water-based stains for interior use that penetrate deep into the wood for a lasting colour effect without losing the ‘wood’ look. The stains are fastdrying, allowing the topcoat to be applied within a few hours, minimizing time and costs.
Timberex Wax-Oil greatly enhances colours and grain and allows wood to age naturally into rich varying tones. Made from fast curing natural oils and carnuba wax it cures to a deep satin finish.