Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s Resistant...
Coo-Var Clear Glaze for Wooden Floors
Coo-Var Clear Glaze for Wooden Floors is a water-thinned, fast drying, low odour coating ideal for wooden floors to provide a quick drying and protective clear coat.
- Quick drying
- Protective, clear coat
- Domestic/Commercial use
- Low odour
Coo-Var Clear Glaze for Wooden Floors is a water-based clear acrylic, fast drying, low odour coating ideal for use on wooden floors, to provide a quick drying and protective clear coat.
For domestic and light commercial use inside where speed of drying is critical and low solvent smell is important. Such as a school sports hall, canteen floor, anywhere where footfall is significant and fumes simply not an option.
All surfaces should be clean, dry, sound and free from contaminants. New wood should be sanded prior to coating to ensure an adequate "key" is produced. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Apply direct to wood, do not apply if the temperature is likely to drop below 7°C during application or during the drying process.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.
A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.
Coo-Var Polyurethane Clear Floor Coating is an oil based clear wood floor varnish which gives a hard glaze to protect most wooden floors and provide an easy to clean surface.
Rust-Oleum 4900 Polycoat 2K is a clear, water-based, 2-component polyurethane topcoat for use on wood, concrete and pre-painted surfaces, also serves as an anti-graffiti coating. Very abrasion resistant, available in a matt or gloss finish, does not yellow, can be used internally and externally, resists boiling water, alcohol, coffee, red...
Blackfriar Heavy Duty Varnish is a two-pack wood and concrete varnish that protects and transforms floors and work surfaces with a tough, hard wearing and professional finish. Touch dry in 2 hours and hard dry in 8 hours, this product is for internal use.
Jotun Trestjerner Parkettlakk is a quick-drying, high quality, water-borne polyurethane clear varnish with low odours for use on wooden laminate/parquet floors. It has a high resistance to wear and scratches and a good chemical resistance. The product adheres well to the flooring enhancing the appearance, and it contains a UV-filter against yellowing.
For commercial or domestic use, on floors, stairs, panelling etc. Timberex Coloured penetrates deeply into the wood filling the pores to form a wear and water resistant surface.
A virtually solvent-free product made from natural, fast-drying oils and resins which penetrate deeply into the wood. Filling and enriching the pores it cures to seal and protect from within
Rust-Oleum Chalky Finish Floor Paint renovates and transforms wood, concrete and previously painted surfaces with a a hard wearing flat matt finish that is suitable for wooden floorboards or concrete flooring, resisting knocks and scratches. Water based with virtually no odour Highly concentrated, with exceptional coverage - Up to 14m2 /...
A range of water-based stains for interior use that penetrate deep into the wood for a lasting colour effect without losing the ‘wood’ look. The stains are fastdrying, allowing the topcoat to be applied within a few hours, minimizing time and costs.
Used for periodic maintenance of floors treated with Timberex Gold, Timberex Free or Timberex Wax-Oil. A deep penetrating, hardening natural oil that is labour efficient and re-sanding is not normally necessary.