A virtually solvent-free product made from natural, fast-drying oils and resins which penetrate deeply into the wood. Filling and enriching the pores it cures to seal and protect from within
Timberex Satin Oil
Used for periodic maintenance of floors treated with Timberex Natural, Timberex Heavy Duty or Timberex Coloured. Available in natural or white, re-sanding is not normally necessary.
Timberex Satin Oil is used for periodic maintenance of floors treated with Timberex Natural, Timberex Heavy Duty or Timberex Coloured. Re-sanding is not normally necessary.
Feautres & Benefits
- Available in Natural or White
- Deep-penetrating, hardening natural oil
- Labour-efficient, easy and rapid maintenance
- Surface-dry after 3 - 6 hours, thoroughly hardened and water resistant after a few days
- VOC 2010-Compliant, EN71-3 Certified (Food- and Toy-safe) and German Anti-slip rating R9
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Rust-Oleum 4900 Polycoat 2K is a clear, water-based, 2-component polyurethane topcoat for use on wood, concrete and pre-painted surfaces, also serves as an anti-graffiti coating. Very abrasion resistant, available in a matt or gloss finish, does not yellow, can be used internally and externally, resists boiling water, alcohol, coffee, red...
Mathys Plasti-Parket is a solvent based polyurethane alkyd varnish ideal for treating and protecting parquet floors and wooden stairs. Simple to use Air-drying Excellent resistance against abrasion Makes maintenance easier Suitable for spot repairs
Jotun Trestjerner Parkettlakk is a quick-drying, high quality, water-borne polyurethane clear varnish with low odours for use on wooden laminate/parquet floors. It has a high resistance to wear and scratches and a good chemical resistance. The product adheres well to the flooring enhancing the appearance, and it contains a UV-filter against yellowing.
A range of water-based grey stains that penetrate deep into the wood for a lasting grey ‘weathered wood’ look. Only need to apply once, then a topcoat can be applied.
Coo-Var P101 2 Pack Polyurethane Varnish is a clear clear aliphatic polyurethane coating which provides a hard wearing protective coating for wooden floors, inside or outside. Product Details For interior and exterior use Suitable Surfaces: Wood Finish: Gloss Application: Roller, brush or airless spray
A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s...
Blackfriar Heavy Duty Varnish is a two-pack wood and concrete varnish that protects and transforms floors and work surfaces with a tough, hard wearing and professional finish. Touch dry in 2 hours and hard dry in 8 hours, this product is for internal use.
For commercial or domestic use, on floors, stairs, panelling etc. Timberex Coloured penetrates deeply into the wood filling the pores to form a wear and water resistant surface.