Coo-Var P101 2 Pack Polyurethane Varnish is a clear aliphatic polyurethane coating which provides a hard wearing protective coating for wooden floors, inside or outside.
A virtually solvent-free product made from natural, fast-drying oils and resins which penetrate deeply into the wood. Filling and enriching the pores it cures to seal and protect from within
Timberex Gold is a virtually solvent-free product made from natural, fast-drying oils and resins which penetrate deeply into the wood. Filling and enriching the pores it cures to seal and protect from within. Timberex Gold has up to three times the coverage of other oils and is very fast curing, making it ideal for sports halls, art galleries or private homes.
Features & Benefits
- Cured and buffed surface has a highly wear and water-resistant finish with a deep satin sheen
- Colour is enriched and grain patterns are highlighted on the smooth, easily maintained surface
- Offers a rich golden colour tone and can be buffed to a high sheen if desired
- VOC 2010 compliant and EN71-3 Certified (Food- and Toy-safe)
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s...
Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.
Blackfriar Heavy Duty Varnish is a two-pack wood and concrete varnish that protects and transforms floors and work surfaces with a tough, hard wearing and professional finish. Touch dry in 2 hours and hard dry in 8 hours, this product is for internal use.
Jotun Trestjerner Parkettlakk is a quick-drying, high quality, water-borne polyurethane clear varnish with low odours for use on wooden laminate/parquet floors. It has a high resistance to wear and scratches and a good chemical resistance. The product adheres well to the flooring enhancing the appearance, and it contains a UV-filter against yellowing.
A range of water-based grey stains that penetrate deep into the wood for a lasting grey ‘weathered wood’ look. Only need to apply once, then a topcoat can be applied.
A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.
Rust-Oleum Chalky Finish Floor Paint renovates and transforms wood, concrete and previously painted surfaces with a a hard wearing flat matt finish that is suitable for wooden floorboards or concrete flooring, resisting knocks and scratches. Water based with virtually no odour Highly concentrated, with exceptional coverage - Up to 14m2 /...
Rust-Oleum 4900 Polycoat 2K is a clear, water-based, 2-component polyurethane topcoat for use on wood, concrete and pre-painted surfaces, also serves as an anti-graffiti coating. Very abrasion resistant, available in a matt or gloss finish, does not yellow, can be used internally and externally, resists boiling water, alcohol, coffee, red...
For commercial or domestic use, on floors, stairs, panelling etc. Timberex Coloured penetrates deeply into the wood filling the pores to form a wear and water resistant surface.
A range of water-based stains for interior use that penetrate deep into the wood for a lasting colour effect without losing the ‘wood’ look. The stains are fastdrying, allowing the topcoat to be applied within a few hours, minimizing time and costs.