SikaBond MS Wood Floor
  • SikaBond MS Wood Floor

SikaBond MS Wood Floor

SKBDMSFL14

SikaBond MS Wood Floor is a high specification adhesive, specifically designed for fixing all types of wooden floors directly onto all common substrates, eliminating the need for battens.

  • One part, ready to use
  • 100% solvent and water free, odourless
  • Suitable for all common types of wood floors
  • Suitable for use with under floor heating
  • Elastic, footfall sound-dampening
  • Can be sanded

Colour
Size
£72.99
VAT excluded

£87.59 Tax incl.
Quantity

Description

SikaBond MS Wood Floor is a high quality, trowel applied MS adhesive for bonding wooden floors to all common substrates. The formulation is completely water and solvent free thereby alleviating the likelihood of wooden boards cupping or crowning. With an extended open time in excess of 40 minutes, this product is ideal for larger application areas. It will bond engineered and solid wood flooring directly to all common subfloors inc. concrete, wood, metal, ceramic tiles, composite boards and most natural stone floors.

SikaBond MS Wood Floor is a one part, ready to use product. It is 100% solvent and water free, as well as being odourless.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Ideal for larger application areas
  • One component, ready to use
  • 100% solvent and water free, odourless
  • Excellent workability
  • Elastic, footfall sound-dampening
  • Suitable for all common types of wood floors
  • Reduces stress on the substrate and also reduces stress transfer between the wood floor and the substrate
  • Suitable for use with under floor heating
  • Can be sanded



Preparation


Substrate Quality

The surface should be clean and dry, homogeneous, even, free from oils and grease, dirt and loose or friable particles. Paint and cement laitance must be removed.

Substrate Preparation

  • Concrete / cement screed: Must be ground, thoroughly cleaned and vacuumed.

  • Anhydrite screed / flowable anhydrite screed: Must be ground and thoroughly cleaned and vacuumed shortly before bonding starts.

  • Glazed ceramic and old ceramic tiles: Degrease, clean with Sika Remover 208 or grind the tile surface and vacuum thoroughly.

  • Wood / gypsum boards (e.g. chipboards, plywood, plasterboard etc): Glue / screw the boards to the substructure. They must be firmly and securely fixed to the substrate. For floating sub floors, please contact our Technical Service Department for assistance (see below).

  • Other substrates: Please contact the Sika Technical Service Department or Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

SikaBond MS Wood Floor can be used without priming on cementitious floors, anhydrite floors, chipboard, concrete and ceramic tiles.

For broadcast mastic asphalt, cementitious floors with excessive moisture content and for use over old adhesive residues or on weak substrates use Sika Primer MB or SikaBond Rapid DPM. For detailed instructions refer to the respective Product Data Sheet.

Application


The minimum rate of application should be no less than 600grms/m2 but may be considerably more depending upon the trowel used. Choose a suitable notched trowel to ensure a minimum 75% contact occurs between the adhesive layer and the underside of the flooring. Remove any excess adhesive whilst still wet.



Limitations


  • SikaBond MS Wood Floor shall only be used by suitably experienced and trained contractors.
  • For optimum workability the adhesive temperature shall be at least +15°C.
  • For the correct curing of the adhesive sufficient ambient moisture is necessary.
  • Wood floors in non-insulated areas such as basements, or other areas without a damp proof membrane, must only be installed after the application of Sikafloor EpoCem sealed with Sika Primer MB vapour barrier to control the moisture.
  • For use with chemically pre-treated types of wood floors (e.g. with ammonia, wood stain, timber preservative) and woods with a high oil content, SikaBond MS Wood Floor is only to be used with the prior written agreement of the Sika Technical Service Department.
  • Do not use SikaBond MS Wood Floor on PE, PP, TEFLON, and certain plasticized synthetic materials (carry out pre-trials or contact our Technical Service Department).
  • Some wood lacquers on the underside of flooring can negatively influence the adhesion of SikaBond MS Wood Floor (pre trials are therefore recommended).
  • SikaBond MS Wood Floor is designed as a wood floor bonding adhesive.
  • When laying parquet type wood floors without tongued and grooved joints, e.g. mosaic parquet floors, please note that the wood floor adhesive must not be pressed up into the joints between the wood pieces.
  • If direct contact with the adhesive of any subsequently applied materials, such as sealers or coatings, etc. cannot be avoided, then their compatibility should be tested and confirmed prior to their use.

For further information please contact your local Sika Technical Service Department or Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.



Coverage


Minimum 0.6kg/m² with a suitable notched trowel.



Drying Time


  • 1.0-2.0 mm - 24 hours (+23°C / 50% r. h.)
  • The floor can be walked on / sanded 12 hrs to 24 hours after installation.



Clean Up


Clean all tools and application equipment with Sika Remover 208 immediately after use. Hardened/cured material must be removed mechanically.



Value Base


All technical data stated in the Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.



Health And Safety


Consult Safety Data Sheet for full lists of hazards.

 

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

Click to go back to the top of the page

Product Details
SKBDMSFL14

Data sheet

Manufacturer
Sika
Interior / Exterior Use
Interior
Water / Solvent Based
Water
For Use On
Prepared
Application Method
Notched Trowel
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
14KG
Base Type
1-part STPE
Suitable Substrates
Concrete, Wood, Metal, Ceramic Tiles, Composite Boards, Stone Floors
Coverage
600grms/m2
Max. Application Temperature
35°C
Min. Application Temperature
15°C
Density
1.6-1.7 kg/l
Shelf Life (from date of manufacture)
9 Months
UN Number
N/A
Touch Dry (at 23°C)
40 minutes
Fully Cured (at 23°C)
24 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Justin  on 2020-05-20 15:38:18
Question: 

Can this be used to bond plywood to a painted metal floor?

Answer: 

No, the data sheet states that any existing paints must be removed prior to application.


Question about the product

* Required fields
(read)
Send
You might also like

Sika Remover 208

Sika Remover 208 can be used for removing traces of Sikaflex products from unwanted places and tools and it is also ideal to clean painted surfaces prior to bonding. Uses: Removes uncured excess material of Sikaflex adhesive or sealant from application tools or from soiled surfaces Pre-cleaning of strongly contaminated non-porous...

Price £12.99
In stock

Sikafloor 81 EpoCem

Sikafloor 81 EpoCem is a three part cement and epoxy combination mortar from Sikafloor for self-smoothing floor screeds of 1.5 to 3mm. Use as a Temporary Moisture Barrier (TMB) or under Epoxy, Polyurethane and PMMA resin floors, over high moisture content substrates, even green concrete. More Information

Price £67.49
In stock

Sika Primer MB

Sika Primer MB is a primer and moisture control coating for cementitious substrates prior to levelling or bonding with elastic sikabond adhesives. It is a one coat, 2-part, solvent free, low viscosity, epoxy resin primer for use in conjunction with Sika Schönox levelling compounds, dispersion primers and SikaBond Wood Floor adhesives....

Price £89.99
In stock

SikaBond Rapid DPM

SikaBond Rapid DPM is a solvent free reaction curing resin primer and damp proof membrane for cement based substrates. Used for priming, consolidating and sealing of absorbent and non-absorbent sub-floors, consolidating weak cement screed and isolation of old adhesive residues.  Features & Benefits 1-part, ready to use. Rapid drying...

Price £225.99
In stock