Alternatively you can email our sales & support team on [email protected]
Teamac Aluminium Wood Primer
512/P224/2/D
Teamac Aluminium Wood Primer, is an oil based primer that contains aluminium. Used primarily to prevent staining on knotted or resinous timber, but also acts as an excellent heavy duty primer.
Suitable for Narrowboats, Cruisers, Barges, Yachts and other Marine Applications. It can be applied to suitably prepared timbers and boards. Marine Aluminium Primer should be used as a system with Teamac Marine Primer Undercoat and Teamac Marine Gloss to retain a long lasting, high gloss finish.
Stain resistant primer ideal for resinous timber.
Provides Flat, Blister Resistant Finish for Topcoats to adhere to.
Teamac Aluminium Wood Primer, is an oil based primer that contains aluminium. Used primarily to prevent staining on knotted or resinous timber, but also acts as an excellent heavy duty primer.
Suitable for Narrowboats, Cruisers, Barges, Yachts and other Marine Applications. It can be applied to suitably prepared timbers and boards. Marine Aluminium Primer should be used as a system with Teamac Marine Primer Undercoat and Teamac Marine Gloss to retain a long lasting, high gloss finish.
Provides Flat, Blister Resistant Finish for Topcoats to adhere to.
Perfect for all timbers.
Product Specification
Technical Data
Volume Solids
45%
VOC Content
427 g/litre
SG
1.26 @ 20 °C
Viscostity
3 @ 25 °C
Flash Point
Above 23°C (closed cup)
Film Thickness Range And Coverage
Product Data
Dry Film Thickness
Wet Film Thickness
Theoretical Coverage
Maximum
35 to 40 μm
80 μm
12 m2/litre @ 35 micron D.F.T.
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.
Drying Times
Drying Times At 20°C/RH 50%
Touch Dry:
2 Hours
Dry To Handle:
8 Hours
Dry To Recoat:
16 hours or overnight
Fully Cured:
N/A
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Surface Preparation
All surfaces should be clean, dry, sound and free from contaminants.
New wood should be sanded prior to coating to ensure an adequate "key" is produced.
Preceeding Coat
Apply Coo-Var Aluminium Wood Primer direct to wood.
Subsequent Coat
Most conventional, white spirit based top coats.
Mixing
Mix well before use.
Application Conditions
As dictated by normal good painting practice.
In confined spaces, provide adequate ventilation during application and drying.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application.
Suitable for use with Brush, Roller or Spray.
Teamac Thinner 14 can also be used for the cleaning of some surfaces prior to application of the coating.
Also suitable for the cleaning of...
Teamac Marine Undercoat, is an interior and exterior, oil based marine undercoat. It is a high opacity undercoat with good flow characteristics for use with Teamac Marine Gloss. It has been designed to reduce topcoat sinkage and to retain a high gloss finish.
Primes and prepares - easy to use
Protects and enhances – anti-corrosive &...
Teamac Marine Gloss, is a high end marine coating with excellent opacity and high gloss finish, suitable for all general marine areas above the waterline; bridge fronts, deckwork, masts, and superstructures.
Advantages
High gloss
Excellent opacity and adhesion
Click to jump down to Technical Data
Mathys Fassiprim Aqua XPE is a water-based, moisture regulating primer for long-lasting bare or previously painted indoor and outdoor timberwork. Easy and fast to apply and has excellent flow properties that ensure an even and professional result.
Water based, matt acrylic
Easy to apply, virtually odourless
Quick drying, quick to sand...
A gentle cleaning agent specially formulated for use on oiled surfaces. Diluted with water as needed and is non-foaming, odourless and does not leave smear. Timberex Bio-C can be used daily or when ever needed.
HMG Pre Cat Primefast 2014-04 is a high solids, 1K MDF primer.
Fast drying
Superb filling properties
Ease of application
Excellent sandability
Click to jump down to Technical Data
Blackfriar High Performance Undercoat is a high build undercoat with good obliterating properties. Suitable for use as an 'intermediate coat' between primer and finishing coats on most common substrates. Ideal for wood, plaster and metal. A slightly structured coating with good leveling and covering properties.
Product Details
Excellent...
SikaBond MS Wood Floor Gun Grade is a high quality, gun-applied MS adhesive for bonding wooden floors to all common substrates. Being permanently elastic it accommodates differential movement caused by changes in humidity and climatic conditions.
100% active, solvent and water free – will not cause warpage or curl of wood blocks/planks...
Coo-Var Patent Knotting is a low viscosity shellac based product. It is used on knotted or resinous areas of wood to help prevent staining of future paint films.
Product Details
For interior and exterior use
Gloss finish
Low viscosity
Shellac based
Coo-Var MDF Primer is a quick drying, water based primer for MDF surfaces. It can be used to prime MDF furniture, desks, doors and more. Extremely easy to apply.
Product Features
For interior use
Matt finish
A white water based primer
Suitable surfaces: MDF
Finish: Matt
Application: Brush
Drying time: Touch Dry 30 mins or 2 hours...
Blackfriar UV Wood Primer is designed to bind with wood grain to provide superior protection against UV damage, the main cause of varnish failure. Enriches and protects your exterior home and garden wood.
Product Features
Enriches and protects your home and garden wood.
Binds with the wood grain.
For use under Blackfriar Exterior...
Sikagard Universal 5 Star Wood Treatment is an all-in-one treatment for wet rot, dry rot, fungi and wood boring insects - it takes care of all your wood treatment and preservation needs in the one can.
It is a solvent free; low odour solution based on Micro-fine active technology with added fungicides, algaecides and Permethrin to actively...
Coo-Var Acrylic Primer Sealer Undercoat is a water-based, low odour primer ideal for plaster preparation or any wood surface which requires priming inside or out. Fast drying and easily applied.
Product Features
Fast drying
Exterior/Interior use
Matt finish
Three tin sizes
Apply with roller, brush or spray
SikaBond 52 Wood Floor is a gun applied, one component, solvent free, fast curing elastic adhesive for professional use for full surface bonding of solid and engineered wood floors (strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet, wood paving (residential) as well as chip boards, plywood and OSB can be bonded.
HMG Pre Cat MDF Sealer is a high solids, clear, 1K Primer / Sealer for use on MDF.
Fast drying
Superb filling properties
Ease of application
Excellent sandability
Click to jump down to Technical Data
Blackfriar Patent Knotting solution seals and prevents seepage from knots and resinous areas on timber. For use on interior and exterior bare or stripped wood.
Product Features
Interior and exterior use.
Seals knots.
Prevents seepage.
Translucent amber solution.
Use only under opaque coatings.
HMG AIF630 Button Polish is a pale coloured sealer for use on wood and metal surfaces. Its fast drying characteristics and ease of application lends itself to a whole variety of usages
The product is a modified resin type and is non-toxic and thus suitable for food contact.
Suitable for use using a rubber for French Polishing purposes....
