Teamac - Wood Primer White
  • Teamac - Wood Primer White
  • Teamac - Wood Primer White
  • Teamac - Wood Primer White
  • Teamac - Wood Primer White

Teamac Wood Primer White

510/P224/1

Teamac Wood Primer White, is a general purpose, modified alkyd based wood primer for wood, especially useful for priming soft wood. It can be applied to suitably prepared timbers and boards. Overcoatable in 16 hours, it is compatible with Teamac Marine Gloss.

  • Traditional Wood Primer For All Type of Wood.
  • Provides Flat Finish For Topcoats to adhere to.
  • Perfect For Marine Ply, Soft and Hard Woods.
  • Overcoatable in 16 hours.
  • Suitable for interior and exterior use.
  • Available in white only.
  • Compatible with Teamac Marine Top Coats.

Click to jump down to Technical Data

Colour
Size
Finish
£19.18
VAT excluded

£23.02 Tax incl.
Quantity

Description

Teamac Aluminium Wood Primer, is a general purpose, modified alkyd based wood primer for wood, especially useful for priming soft wood.  It can be applied to suitably prepared timbers and boards.  Overcoatable in 16 hours, it is compatible with Teamac Marine Gloss.



Click To Jump To Section:




Features & Benefits


    • Traditional Wood Primer For All Type of Wood.
    • Provides Flat Finish For Topcoats to adhere to.
    • Perfect For Marine Ply, Soft and Hard Woods.
    • Overcoatable in 16 hours.
    • Suitable for interior and exterior use.
    • Available in white only.
    • Compatible with Teamac Marine Top Coats.

Click to jump down to Technical Data



Product Specification


Technical Data
Volume Solids 51%
VOC Content 434 g/litre
SG 1.49 @ 20 °C
Viscostity 3.2 @ 25 °C
Flash Point Above 32°C (closed cup)



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness Theoretical Coverage
Maximum 35 to 40 μm 75 μm 13 m2/litre @ 35 micron D.F.T.



The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.



Drying Times


Drying Times At 20°C/RH 50%
Touch Dry: 3 Hours
Dry To Handle: 8 Hours
Dry To Recoat: 16 hours or overnight
Fully Cured: 5 - 7 Days



Low temperature and high humidity will adversely affect application, drying and performance of any coating.



Surface Preparation


  • All surfaces should be clean, dry, sound and free from contaminants.



Preceeding Coat


  • N/A



Subsequent Coat


  • Suitable topcoat.



Mixing


  • Mix well before use.



Application Conditions


As dictated by normal good painting practice.  In confined spaces, provide adequate ventilation during application and drying.



Application Methods


Method Airless Spray Conventional Spray Brush Roller
  No No Yes No



  • Thinner (Max vol): Thinners 14 (10%)
  • Nozzle size: 0.011"
  • Nozzle pressure: 1800 to 2000 psi.
  • Cleaning solvent: Thinners 14



Health & Safety


See safety data sheet - SDS 10770 in attachments section above.

Click to go back to the top of the page

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
510/P224/1

Data sheet

Base Type
Alkyd based
Interior/Exterior Use
For both interior and exterior use.
Suitable Substrates
Wood
Key Features
Traditional Wood Primer For All Type of Wood. Provides Flat Finish For Topcoats to adhere to. Perfect For Marine Ply, Soft and Hard Woods. Overcoatable in 16 hours
Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
8 Hours
Dry to Recoat (at 20°C)
16 hours or overnight
Fully Cured (at 20°C)
5 - 7 Days
Coverage
13m² per litre
Recommended Thinner/Cleaner
Teamac Thinner 14
Solids by Volume
51%
VOC
434 g/litre
Touch Dry
3 Hours
Finish
Semi-Matt
Size
1 litre, 2.5 litre, 5 litre, 20 litre
Recommended Dry Film Thickness
35 to 40 μm
Recommended Wet Film Thickness
75 μm
UN Number
1263
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Teamac Thinner 14

A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application. Suitable for use with Brush, Roller or Spray. Teamac Thinner 14 can also be used for the cleaning of some surfaces prior to application of the coating. Also suitable for the cleaning of...

Price £13.54
In stock

Teamac Marine Gloss

Teamac Marine Gloss, is a high end marine coating with excellent opacity and high gloss finish, suitable for all general marine areas above the waterline; bridge fronts, deckwork, masts, and superstructures. High gloss Excellent opacity and adhesion Click to jump down to Technical Data Coverage Calculator

Price £23.04
In stock