Mona-Guard WD - Clear
  • Mona-Guard WD - Clear

Hydron Mona-Guard WD - Clear


Hydron Mona-Guard WD - Clear is a terrific wood sealer for bare or rejuvinated wood. One such use can be for decking; applying a clear protective coat which will breathe new life into the wood, whilst prolonging the life of the structure.


  • Great for reviving life from dull wooden surfaces.
  • Resistance to water, oil, dirt, pollution.
  • Internal or external use.

**Available for delivery - see Delivery Options below**

VAT excluded

£92.93 Tax incl.


The Mona-Guard WD-Clear is a wood sealer that will rejuvinate bare or renovated wood, such as decking areas, panelling, fencing, and even garden furniture.

Not limited to external use, this clear coating can easily be applied to internal wood structures, such as beams and furniture.

Product Use in the Workplace

  • Timber decking - When first laid, this beautiful exterior extension to a home looks pristine and clean, but over time, weathering and pollutants take its toll on the decking. This results in a grubby appearance that no longer looks quite as inviting as it did before. Applying this clear coating will help protect your decking against pollutants, stains and weathering.
  • Garden furniture - Wooden table and chairs in the back garden need to look clean for your family and guests. Spending time in the garden on a lovely summer's day is one of the greatest joys in life, and through use, stains and other pollutants can leave the furniture a bit less than inviting. Sunshine, family, BBQ and clean garden furniture; the perfect gathering.

Features & Benefits

  • For use on bare or renovated wood.
  • Great for reviving life from dull wooden surfaces.
  • Resistance to water, oil, dirt, pollution.
  • Weather and UV resistant.
  • Internal or external use.
  • Up to 10 years product performance.
  • Environmentally friendly, solvent-free.
  • Clear in colour.
  • 12-month shelf life.


Ensure surfaces to be treated are clean, free from contamination and dry. Treat all areas affected by organic growth with Mona-Clean Algae Remover.

New wood and in general - the surface must be sound, clean, dry, free from frost, laitance, oil, grease and all dust, loose and friable materials must be completely removed from surfaces before application of Mona-Guard WD-Clear.

Resinous or greyed wood - clean with Mona-Clean Wood Replenisher, rinse thoroughly, clean off all dust and dry the wood.

Damaged wood - sand down to bare wood, clean off all dust and dry the wood. It is recommended to vacuum all residual dust left from sanding process.


2 coat application by means of Low pressure spray, brush or roller. All equipment should be cleaned with water immediately after use.

NOTE: Mona-Guard WD-Clear cannot prevent the wood from splitting if it is exposed to excessive variations of hygrometry.

Recommended storage is in a cool, dry place with temperatures between 10-15°C. Do not allow to freeze.

Product Details

Data sheet

Interior / Exterior Use
Interior and Exterior
Water / Solvent Based
For Use On
Unprepared, Oak, Pine, Spruce, Douglas Fir,
Application Method
Spray, Brush, Roller
Single, Two or Three Pack
Pack Size
Brush, Roller, Spray
3-5 m²/Litre depending on substrate type. It is recommend a small trial area to ensure correct application levels are used to obtain the required performance properties subjected to the differing porosity levels of porous wooden materials.

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields