HMG Thinner 2631
HMG Thinner 2631 is a hydrocarbon-free thinner.For use with compatible HMG systems.More Information Delivery Info
£47.48 (incl. VAT)
£39.57 (ex. VAT)
HMG DG282 14 MDF Sealer (Base) is a high solids, fast drying MDF primer.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
2-Pack System Details | |||||
---|---|---|---|---|---|
Base (Part 1) | HMG DG282 14 MDF Sealer | ||||
Hardener (Part 2) | HMG Acid Cat 91 Hardener |
HMG DG282 14 MDF Sealer is a high solids, fast drying MDF primer.
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Acid Cat 91 Hardener.
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG DG282 14 MDF Sealer | ||||||
Volume Solids: | 59.6% | |||||
VOC Content: | 0.530kgs/ltr | |||||
SG: | - | |||||
Viscosity: | 250 mPas | |||||
Density: | 1.298 g/cm³ | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Pot Life: | n/a | |||||
Flash Point: | 13°C |
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Compliant Spray Gun: | 60 μm | 100 μm | |
Pressure Pot: | 60 μm | 100 μm |
Coverage: 10 square metres per litre
Drying Times At 20°C | |
---|---|
Touch Dry: | 20 minutes |
Dry To Handle: | 60 minutes |
Dry To Recoat: | 30 minutes minimum - 60 minutes maximum |
Fully Cured: | 24 hours |
Technical Data | |||||
---|---|---|---|---|---|
Compliant Spray Gun | Pressure Pot | ||||
Mixing Ratio: | Base: 9 | Base: 9 | |||
Activator: 1 | Activator: 1 | ||||
Thinner up to 10% | - | ||||
Hardener Options: | Acid Cat 91 Hardener | Acid Cat 91 Hardener | |||
Thinner Options: | Thinner 2631 | - | |||
Viscosity: | 50 - 60 seconds B4 cup | 60 - 65 seconds B4 cup | |||
Spray Gun Setup: | 1.8 - 2.0 | 1.2 - 1.4 | |||
Number Of Coats (Guide Only): | 2 coats | 2 coats | |||
Flash Off: | 10 - 15 minutes between coats | 10 - 15 minutes between coats |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG DG282 14 MDF Sealer | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 78°C | |||||
Flash Point: | 13°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 370°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 3.0 Vol % | |||||
Explosion limits: Upper: | 10.4 Vol % | |||||
Vapour pressure at 20°C: | 10.7 hPa | |||||
Density at 20°C: | 1.298 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | NOT MISCIBLE | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | 250 mPas | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 42.3% - Water 0.1% | |||||
Solids content: | 59.6% |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG DG282 14 MDF Sealer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2631 is a hydrocarbon-free thinner.For use with compatible HMG systems.More Information Delivery Info
£47.48 (incl. VAT)
£39.57 (ex. VAT)
HMG Acid Cat 91 Hardener is an acid catalyst hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG Acid Cat MB SealerHMG Acid Cat MB ColoursHMG DG282 14 MDF SealerHardener (Part 2) HMG Acid Cat 91...
£15.90 (incl. VAT)
£13.25 (ex. VAT)