Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Blackfriar Wood Primer is a high performance solvent based primer for new or old bare soft wood. Penetrates the surface of the wood to provide an excellent foundation for painting.
Product Features
Blackfriar Wood Primer provides the perfect foundation to painted surfaces. Its special formulation makes easy work of new and stripped surfaces, enabling you to over-coat with ease.
Preparation
Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination. Treat knots and resinous areas with Blackfriar Patent Knotting and allow to dry before applying Blackfriar Wood Primer.
Application
Stir thoroughly prior to use with a broad stirrer. The product may be applied by brush, short pile roller or spray. Apply a generous even coat and brush well into the grain. Apply one or two coats as required.
Thinning
Thinning not recommended.
Limitations
Do not use under cold (less than 5°C), damp or humid conditions. Not recommended for hardwoods or
resinous woods (use Blackfriar Aluminium Wood Primer).
Drying Time
Touch dry in 2 - 4 hours. Recoat after 16 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.
Clean Up
Remove as much product as possible from application equipment before washing with white spirit. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.
Storage
Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.
Features & Benefits
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Blackfriar Patent Knotting solution seals and prevents seepage from knots and resinous areas on timber. For use on interior and exterior bare or stripped wood. Product Features Interior and exterior use. Seals knots. Prevents seepage. Translucent amber solution. Use only under opaque coatings.
Blackfriar Aluminium Wood Primer is an aluminium wood primer for hardwoods, which prevents bleed through fresh paintwork. Specifically formulated for painting new or old bare hard or resinous woods. Product Features Contains aluminium pigments to protect against bleed from resinous woods. For resinous and bare hard woods. Good barrier...
