Bedec Aqua-Advanced Primer Undercoat
A high performance acrylic primer and undercoat specially formulated for durability, adhesion and water resistance for interior and exterior surfaces providing a suitable base before applying acrylic water based or alkyd based enamels.
This product is temporarily out-of-stock. Please contact a member of our Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information or suitable alternatives.
See our Customer News page for the latest updates on COVID-19 and business availability.
Bedec Aqua-Advanced Primer Undercoat is a high performance acrylic primer and undercoat specially formulated using a 100% acrylic resin which has a proven performance record for durability, adhesion and water resistance.
Designed for interior and exterior use, providing adhesion promotion on to most substrates and as well as also providing a suitable base before applying acrylic water based or alkyd based enamels. Ideal for use on timber, metals, plastics, masonry, previously painted surfaces and more.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 13-15m² per litre
- Touch Dry
- 30 Mins
|Sue on 2018-10-05 18:25:32|| |
I reffer to BEDEC undercoat/primer white is it eally nessassery to use this ,before applying BEDEC white high gloss ?? reason i ask i,m disabled trying to make lighter easier work for myself . Please give your honest opinion ?? THank,s
Bedec advise that it is substrate dependent. If its porous, they recommend to water down the first coat by 30% so it soaks in before going on with 2 top coats. If not porous, you would need to abrade the surface to give the paint something to adhere to. You may find the finish is not as good without the primer undercoat as you wont have built up the layers first.