Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Application
• Limitations

Features & Benefits

• To seal and protect:
  • Internal wood
  • Wallpaper
  • Emulsion
  • Latex
  • Wall paints and decorative paint finishes
  • Plaster
  • Fabrics
  • Inside or outside
• Water-resistant, stain resistant, heat resistant, and vapour permeable
• UV protective filters - absorb harmful UV radiation, providing colour fade resistance, surface stability, and protection from outdoor weathering
• Microporous - the special microporous structure, resists water ingress. The water repellent surface is highly durable. the structure allows the finished surface to breathe. The minute micro pores repel mould and other airborne contaminants whilst allowing air to pass through, protecting the decor from algae, mildew and fungal attack
• Biocide boost - the finished surface remains free from mould, algae and fungus
• Quick drying - fast dry and recoat time

Application

• Ensure the surface to be coated is clean and free from grease, wax or polish
• Dilute 10% with water to prime porous surfaces
• Apply with good quality synthetic brush, recommended, or by conventional or High Volume Low-pressure spray. Rollers are not recommended as stippling may occur
• Gloss or Satin: Apply 2-3 coats. Deadflat: Apply 1-2 coats. Where a dead flat finish with a high degree of protection is required. Apply gloss/satin and finish with a thin coat of dead flat
• If cissing occurs, rub onto affected area with a damp cloth to break the surface tension and re-apply
• Approx. 15-20 sq. m per litre coverage
• Any equipment used can be cleaned using soap and water before the clear coat dries. Wipe any excess off surfaces with a damp cloth. Any dried deposits will need a paint stripper to remove them
• Drying time: 1 to 2 Hours @ 20°C

Limitations

• Always apply to a test area before starting work
• Appearance may vary according to the colour and type of wood and the number of coats
• Apply dead flat finish sparingly and brush out well, over application could result in misting
• Test dead flat finish for misting over dark colours
• Test dead flat finish on all wallpapers to ensure compatibility
• When applied over emulsion/latex paint, it is possible that Decorators Varnish can draw certain stains through the paint, which would not otherwise be visible
• Do not apply over uncured oil paints