Sub-category links
Filter By
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
There are 18 products.
Active filters
Hempadur Multi-Strength GF 35870 is an amine adduct cured epoxy coating. The product is reinforced with glass flakes and cures to a hard, impact and abrasion resistant coating with good resistance to sea water and splashes from petrol and related products.Self-primed, high-build coating recommended for areas subject to abrasion and/or to a...
£268.16 (incl. VAT)
£223.47 (ex. VAT)
Hempadur Multi-Strength 45703 is a self-priming, two-component, highbuild, aluminium pigmented pure epoxy paint which cures to an abrasion and corrosion resistant coating.Recommended as a primer for multi-strength systems for immersion and splash-zone service For airless spray application Colour swatch is a representation and not...
£332.35 (incl. VAT)
£276.96 (ex. VAT)
Hempatex HI-Build 46410 is a physically drying, high-build coating with good colour retention as a flat finish, based on acrylic resin and non-chlorinated plasticizer.Recommended as a primer, intermediate or finishing coat in Hempatex-systems in moderate corrosive environments, suitable as a self-priming repair and touch-up coating for...
£52.70 (incl. VAT)
£43.92 (ex. VAT)
Tikkurila Tematar TFA is a two component, modified epoxy paint. Suitable for steel, zinc and concrete surfaces exposed to abrasion and/or chemical stress, especially for underground and underwater structures.Recommended for sludge and sewage tanks, pontoons, ship ballast tanks, fuel oil and crude oil tanks, and other underground or...
£301.24 (incl. VAT)
£251.03 (ex. VAT)
Tikkurila Temanyl GF, a two-component glass flake reinforced vinyl ester acrylic co-polymer heavy duty coating/lining to be used in immersion environments where superior resistance to chemical stress and high temperature is required. Especially developed for long-term, economical protection of storage tanks.Less downtime - surfaces can be...
£1,814.08 (incl. VAT)
£1,511.73 (ex. VAT)
A pure epoxy outfitting primer, suitable for use on a wide range of metal substrates as a primer, midcoat or finish coat in both atmospheric and immersed environments.Can be applied to carbon steel, stainless steel, galvanised steel, aluminium, GRP and thermally sprayed zinc Suitable temperature range from -196°C to +210°CMore...
£288.11 (incl. VAT)
£240.09 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
