- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Industry Approved Systems
Industry Approved Systems for metal are coating solutions developed to meet recognised safety and durability standards across sectors such as marine, rail, and infrastructure. These systems are compatible with a wide range of metal paints, offering dependable corrosion protection in aggressive environments.
Jotun Jotamastic 90 Alu B15
Jotun Jotamastic 90 Alu B15 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids, high build product. It is an aluminium pigmented product specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments...
Cromadex V60 Two Pack Rail Topcoat
Cromadex V60 Two Pack Rail Topcoat is a two pack polyurethane topcoat formulated for refurbishment programmes in the rail industry. When used as a system with Cromadex V39 Rail Primer (Refurbishment) it meets the following specifications: BS 6853 1999 Annex B, BS 476 Part 6 : 1989 Class 0, BS 476 Part 7 : 1997 Class 1. 5,000+ colours, inc....
Sherwin-Williams Transgard TG115
Sherwin-Williams Transgard TG115 is a high-build aluminium epoxy maintenance primer for abraded surfaces. High-build aluminium epoxy maintenance primer For abraded surfaces Application by brush or spray Suitable for atmospherically exposed surfaces but not recommended for exposure to severe chemical environments
Jotun Jotamastic 90 B16
Jotun Jotamastic 90 White B16 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It has been specifically developed to meet the requirements of UK Highway Agency Item 116 for use on bridges and highway infrastructure.
Cromadex V39 Rail Refurbishment Primer
Cromadex V39 Rail Refurbishment Primer is an alkyd primer formulated for refurbishment programmes in the rail industry. When used as a system with Cromadex V60 Two Pack Rail Topcoat it meets the following specifications. BS 6853 1999 Annex B, BS 476 Part 6 : 1989 Class 0, BS 476 Part 7 : 1997 Class 1.
Jotun Penguard Express B12
Jotun Penguard Express B12 is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product that can be used as a primer, mid coat, finish coat or as a single coat system. Approved to meet the requirements of UK Highway Agency Item 112 for use on bridges and highway infrastructure.
Jotun Jotamastic 90 Alu B15 WG
Jotun Jotamastic 90 Alu B15 WG is a `Wintergrade` version of Jotun Jotamastic 90 Alu B15 to aid application in lower temperatures and to provide faster drying and curing times. Two component polyamine cured epoxy mastic coating Surface tolerant Abrasion resistant High solids High build product
Jotun Penguard Express B11
Jotun Penguard Express B11 can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. Suitable for properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero surface temperatures.
Sherwin-Williams Transgard TG116
Sherwin-Williams Transgard TG116 is a two pack epoxy undercoat for abraded surfaces. It is used for application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes. Two pack epoxy Application by brush or airless spray Also available in Dark Grey on a made to order basis - please contact us on...
Jotun Jotamastic 90 White B16 WG
Jotun Jotamastic 90 White B16 WG is a `Wintergrade` version of Jotun Jotamastic 90 White B16 to aid application in lower temperatures and to provide faster drying and curing times. Two component polyamine cured epoxy mastic coating Surface tolerant Abrasion resistant High solids High build Short overcoating intervals, improving...
Sherwin-Williams Transgard TG111V2
Sherwin-Williams Transgard TG111V2 is a high build 2-pack epoxy zinc phosphate primer/buildcoat, designed as anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning. High build 2-pack epoxy Designed as anti-corrosive protection of carbon steel surfaces Can be applied at thicknesses between 75 and 150 microns...
Jotun Penguard Special B10
Jotun Penguard Special B10 is a two component polyamide cured high molecular weight epoxy coating that contains 65% zinc phosphate pigments by weight. Specially designed as a primer for galvanised steel it can be used as a primer as part of a complete system in atmospheric environments.
Sherwin-Williams Transgard TG110
Sherwin-Williams Transgard TG110 is a zinc phosphate pigmented 2-pack epoxy temporary protective primer, used as a temporary protective for steel surfaces prepared by abrasive blast cleaning. 2-pack epoxy temporary protective primer For steel surfaces Suitable for use in conjunction with cathodically protected steel Also suitable for...
Tikkurila Temaclad SC 50
Tikkurila Temaclad SC 50, a two-component, semi-gloss acrylic polyurethane with anticorrosive pigmentation - hardener aliphatic isocyanate - recommended to be used as a single-coat finish for steel, aluminium and galvanized surfaces. Suitable for urban, marine and industrial environments Also suitable to be used as a topcoat in...
Need Help?
Need Help?
Compliant Paint Systems for ISO 12944, NORSOK, MED and Highways Specifications
Industry Approved Systems are comprehensive coating solutions built around strict performance specifications, designed to ensure metal structures remain durable, safe, and compliant in demanding applications. These systems often include surface preparation products, primers, and topcoats selected and tested according to standards like NORSOK, Highways, ISO 12944, Network Rail, and MED. Depending on the sector, they provide protection from salt spray, weathering, mechanical abrasion, and chemical exposure—reducing downtime and extending the lifespan of critical infrastructure.
Where adhesion, surface tolerance, or corrosion resistance is critical, metal primers play a vital role in system performance. These are tailored to work with compatible topcoats for specific use cases such as offshore rigs, highways infrastructure, railway bridges, or marine vessels. Each approved system is tested against its relevant standards to ensure fitness for purpose, whether on new builds or maintenance projects in highly regulated industries.
Industry Approved System FAQs
What does it mean when a coating system is “industry approved”?
An industry-approved coating system has been tested and certified to meet recognised standards such as NORSOK, ISO 12944, or Network Rail specifications. These approvals confirm the system’s suitability for protecting metal in demanding environments like offshore platforms, bridges, or railway infrastructure.
Can I use these systems on existing infrastructure, or are they only for new builds?
Industry Approved Systems can be used for both new construction and maintenance projects. With the correct surface preparation and compatible products—such as corrosion-resistant metal primers—they can extend the service life of existing metalwork significantly.
Are these systems suitable for DIY or general domestic use?
Generally, no. These systems are formulated for industrial, commercial, or infrastructure applications and often require specific application methods, surface preparation standards, and performance requirements. For home or light trade use, explore high-performance metal paints suited to domestic projects.