Specifically formulated for utility reinstatements. Great for bedding large section manhole covers and frames. BT LN550 and LN320 compliant Conforms to HA104/09 Can be used in the wet Combines as a bedding mortar and backfill Aids lateral stability
List of products by brand Instarmac
Instarmac are specialists in cement and bitumen-based products, for over 40 years. Their Ultracrete range is available here at Rawlins Paints for use in highway maintenance;
- First time permanent patching materials
- High specification concretes
- Fast setting repair mortars
- Anti-skid reinstatement solution
Put through rigorous testing, Instarmac products are proven, trusted and durable, with innovative designs and materials giving the best performance in real life and real time situations.
One of the first companies to gain the new ISO 9001:2015 and ISO 14001:2015 accreditations, Instarmac operates to the highest Quality Management Systems BS EN ISO 9001, ISO14001 and OHSAS 18001 to ensure the best quality and performance.
View the full Instarmac Ultracrete range below, complete with data sheets for each product.
The environmentally friendly alternative to resin-based materials, specifically formulated for the bedding of all access covers. Conforms to HA104/09 Can be used in the wet BT Approved 53N/mm² compressive strength at 3 hours 6.10N/mm² tensile strength at 3 hours
High specification C40 concrete in a bag, ideal for applications with limited site access where bulk concrete cannot be delivered. Easily transportable Flowable Pre-blended cement for a consistent mix High compressive strength 55N/mm²
Fibre modified concrete, suitable for small and large reinstatements to car parks, warehouses and bridge decks. Shrinkage compensated High compressive strength 66N/mm² Foot traffic: 2 hours Pre-blended, just add water
Ideal as a bridge bearing grout as well as for the securing of stanchion base plates, machine beds and parapet legs. High Flow Can be pumped or poured Will no corrode or stain Non-shrink 70N/mm² compressive strength Complies with the specification for Highway Works Clause 2601
Designed for the application to asphalt roads to prevent water ingress and progressive fretting. HAPAS Approved since 2012 No waste, cut as required Prolongs the life of your repair Easy to use Fast installation Open to traffic: 10 minutes
For the patching and reinstating of high friction areas after maintenance work has taken place. Restores anti-skid Fast return to service Available in a range of colours Grey, Buff, Red, Green, Black Easy to use Set time: 1-2 hours
Instaline is ideal for the reinstatement of line areas on car parks, roads and carriageways. This thermoplastic road marking provides anti-skid, is reflective and easy to apply. Conforms to BS EN 1436:2007 as a road marking material Remains flexible and easy to un-roll in temperatures as low as 5°C No waste, cut as required
10mm grade - For permanent repairs in type 3 & 4 roads Easy work formula Easier to compact HAPAS Approved since 2002 Instantly trafficable No waste, resealable buckets Easy to apply Depth: 30-100mm Use in all weathers For planned repairs
UltraCrete Instant Road Repair 6mm grade is designed for permanent asphalt repairs in footways, footpaths and cycle tracks. Easy work formula Easier to compact HAPAS Approved since 2002 Instantly trafficable No waste, resealable buckets Easy to apply For planned and reactive repairs Use in all weathers
6mm grade - For permanent repairs to cushions and ramps, bus lanes, cycle tracks, bus stops and colour coded car parking. Easy work formula Easier to compact HAPAS Approved since 2002 Instantly trafficable No waste, resealable buckets Depth: 15-100mm Easy to apply For planned and reactive repairs Use in all weathers
Ideal as an effective and quick method for line or spot marking of pothole repairs, car parks, warehouses, sports halls and building sites. No waste Easy adhesion Durable Economical Available in a range of colours yellow, white, blue
Instarmac are a market-leading specialist in cement and bitumen-based products, established for over 40 years in the UK. Their product ranges include Ultracrete - distributed by Rawlins Paints - which contains solutions for all your highway maintenance needs.
Instarmac's Ultracrete is a proven and trusted range and includes first time permanent patching materials, high specification concretes, fast setting repair mortars and anti-skid reinstatement solutions for repair and maintenance projects on roads, cycle paths, walkways and more.
Such products need to be durable due to the inconvenience in digging up highways, blocking traffic and causing delays to replace and repair damaged surfaces, road markings, manhole covers, etc. Instarmac provide high specification products that are durable, proven and independently tested, backed up by first class customer, technical and site support.
Contact us today for technical and product support across an extensive range of HAPAS-approved bedding mortars, backfill flowable concretes, high-specification concretes and line marker reinstatements. Flow rates, drying times and application methods are also available for each product in the attached datasheets – more information is available on request.