There are 4 products.
Active filters
Rubio Monocoat Cleaner is used as a cleaner for raw wood surfaces before the application of Rubio Monocoat Oil Plus. Also used to clean the materials that were used during the application. More Information
Rubio Monocoat Tannin Remover is a ready-to-use product for removing stains and spots on wood caused by a reaction to acid and water. Rings/stains from cans, flower pots, etc. After water damage on parquet In case of efflorescence on exterior wood (on the bottom of gates, doors, on walls) Can be used on untreated, oiled and waxed...
Rubio Monocoat WoodPrep removes residues from sanding dust, minimises sanding errors and reduces wood type-related tannins and oils. Improves the intensity of the coloured Rubio Monocoat oil through better pigment absorption Decreases the chance of discolouration Improves adhesion to naturally waxy and oil-rich wood types Good coverage,...
Osmo Paint Stripper is a powerful, low odour, universal paint stripper for solvent-resistant substrates. Thanks to its long open time, it can dissolve several layers of lacquer or varnish in one work step. The paint stripper gel is free of aromatic compounds and chlorinated hydrocarbons. Powerful paint remover for the interior and exterior...
Remove residues from sanding dust, tannins, stains, and spots cause by reactions to acid and water. Rubio Monocoat WoodPrep decreases the chance of discolouration, and Rubio Monocoat Tannin Remover tackles rings and stains from items left on wood surfaces such as cans, flower pots, mugs, etc. For use after water damage on parquet, in case of efflorescence on exterior wood (on the bottom of gates, doors, on walls), and can be used on untreated, oiled and waxed surfaces.
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
