Use wood filler and putty to seal up holes in wood as part of your preparation for applying wood oils, waxes, varnishes and more to protect wood surfaces. Useful for wood floors, furniture, wooden doors and surrounds, worktops, and more wood surfaces.
Suitable for filling small cracks that appear in wood surfaces, for filling between joints, and for filling small damage such as holes from nails, and screws.
Rubio Monocoat Woodfiller Quick is environmentally friendly putty in mixable powder form for the preparation of indoor joinery, that guarantees quick curing and has an excellent ability to absorb any correspondent finishing colour from the Rubio Monocoat range.
Shrink-proof
Easy sanding after just 2 hours
More Information
Osmo Wood Filler is suitable for patching small cracks, holes and joints in wood. Excellent for commercial and domestic applications.
Will dry lighter and return to its original colour once the final finish is applied
Can be mixed with any tint or stain to achieve a custom colour
Fast drying, approximately 30 minutes - Stainable, before...
Osmo Gap Sealer, a high quality, one component, flexible sealant that has plasto-elastic qualities. Applications include:
Expanding fuga between prefabricate construction element
Assembly wood, PVC, iron and aluminium joinery
Joints in stone, wood, concrete, plaster and brick works etc
Sealing of window and door frame to masonry
Can be...
Osmo Wood Putty is suitable for filling small cracks (< 2 mm) and small damages (e.g. screw holes) in wooden flooring and parquet. Can be used universally on all wood species. Not suitable for elastic constructions, e.g. plank or sprung floors as well as cork flooring.
High filling power
Quick drying
Good sanding properties
Low odour...
Tikkurila Colowood is a water-borne filler for filling holes in interior wooden surfaces such as fibre boards, solid wood or veneer.
Recommended for furniture, doors, panel walls and ceilings
For industrial and professional use only
More Information
Tikkurila Colofill is a two-component solvent-free epoxy putty that adheres extremely well to different kinds of surfaces, thus ensuring total durability of the overcoating system.
Does not shrink the way common putties do when applied in thick layers, thus ensuring the evenness of the treated surface
Very low amount of Volatile Organic...
Tikkurila Pinja Pro Primer is an all-round water-borne primer for fine-sawn timber, suitable for priming of boards and panels for exterior cladding.
Provides temporary protection for up to 10 months without a topcoat
Makes the selection of a topcoat easy, as it can be topcoated with either water-borne or alkyd products
Economical primer...
Tikkurila Pinja Pro is a water-borne acrylate exterior paint that is suitable for exterior wooden panels and claddings.
Good protection against weathering
Protects the surface against moisture, sunlight and dirt
For industrial use only
Price on application - enquire with our team on 0113 2455450 or send a message to...
What is the difference between wood putty and wood filler?
Our wood fillers are available in many different tones and shades for matching existing wood surfaces. These include popular woods such as teak, beech, oak, pine, and mahogany, as well as exotic species including jatoba and ebony. Osmo Wood Putty is instead mixed with sanding dust from the surface to match the colour once dry.
Colour Sample Disclaimer
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
