Sub-category links
Filter By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
There are 9 products.
Active filters
Hempadur Mastic 45880 is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperature.Recommended use as a self-primed, surface tolerant paint system, or as an intermediate or a topcoat in systems where low VOC and high film build are required EC-type examined as...
£63.04 (incl. VAT)
£52.53 (ex. VAT)
Hempaprime Multi 500 is a fast drying, high solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments.Recommended as a high-build, intermediate coat in high performance coating systems where fast handling and short overcoating times are required Meets the...
£226.80 (incl. VAT)
£189.00 (ex. VAT)
Hempatex HI-Build 46410 is a physically drying, high-build coating with good colour retention as a flat finish, based on acrylic resin and non-chlorinated plasticizer.Recommended as a primer, intermediate or finishing coat in Hempatex-systems in moderate corrosive environments, suitable as a self-priming repair and touch-up coating for...
£52.70 (incl. VAT)
£43.92 (ex. VAT)
Hempadur Easy 47700 is a high-build, pure epoxy coating which cures to a hard and tough coating with good resistance to abrasion and seawater, intended for all year application down to -10°C [14°F] and for applications where fast recoating and handling is required.Recommended as a self-primed, heavy-duty coating or intermediate coat for...
£275.06 (incl. VAT)
£229.22 (ex. VAT)
Hempadur 47140 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant.For professional use only Primer for mild to medium atmospheric environments, or intermediate/finishing coat for epoxy systems in medium to severely corrosive...
£158.15 (incl. VAT)
£131.79 (ex. VAT)
Hempadur 47200 is a two-component, polyamine adduct cured epoxy paint with a very short drying time. Contains micaceous iron oxide and zinc phosphate. The product cures at temperatures above -10°C and forms a tough and hardwearing coating.For professional use only Fast drying primer or intermediate coat in Hempadur systems especially...
£54.43 (incl. VAT)
£45.36 (ex. VAT)
Hempadur 47300 is a two-component epoxy paint, which cures to a hard and tough coating with good resistance to abrasion and seawater. It contains zinc phosphate for better corrosion protection.For professional use only Midcoat epoxy and self-primed high performance coating systems for atmospheric exposure, intended for all year...
£249.84 (incl. VAT)
£208.20 (ex. VAT)
Hempadur 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products....
£54.46 (incl. VAT)
£45.38 (ex. VAT)
Hempathane Fast Dry 55750 is a 2-component polyurethane paint. Cured with aliphatic isocyanates. Good gloss retention and colour stability. Contains zinc phosphate.Recommended as a high-build solution for protecting steel structures, in compliance with VOC regulations May be specified as a one-coat direct-to-metal system in corrosive...
£67.06 (incl. VAT)
£55.88 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
