Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:
Up to 90 minutes’ fire resistance
Can be overcoated with compatible decorative topcoat
Water-based
Low odour
Environmentally friendly
Cost effective for large projects
Certificate of supply available on request
Can be applied by brush,...
The ultimate performance shellac-based primer-sealer and stain killer for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains.
Available in more than 90 colours from RAL and BS shades (1L, 2.5L, 5L only).
• Ultimate...
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating:
For foot traffic, interior and exterior
Anti-slip additive is premixed in the coating
For use on old concrete (>2 yrs), metal and wood
Unique uniform appearance, high gloss
Touch dry: 6 hours, coverage: 8m² per litre
Available in...
Envirograf EP/CP is a white fire protection coating for plasterboard and lath-&-plaster ceilings of various thicknesses:
BS Class 0 & 1, EU standard B/s1/d0 & up to 60 minutes' protection
Develops a microporous intumescent layer with a smooth decorative finish
When attacked by fire, the intumescent material protects the...
Envirograf EP/CP Primer is a water-based, clear adhesion primer to apply over existing painted surfaces before applying Envirograf EP/CP Fire Protection Coating particularly where there is distemper, dirt or dust.
Envirograf HW02E Clear Intumescent Coating upgrades the fire resistance of new and certain already coated timber and wood related surfaces.
Advantages
For internal/external use
BS Class 0 & Class 1 and up to 60 mins fire resistance on suitable surfaces and substrates
To be used as part of a full Envirograf intumescent system...
Envirograf HW01 is a white, intumescent coating for wood.
Advantages:
BS Class 0 & Class 1 protection
30 & 60 mins’ fire resistance
White finish for upgrading new or previously coated wood & timber
Water-based for internal/external use
Should be used as part of a complete Envirograf system
Envirograf HWAP/WB Primer is a clear water based primer:
For use under Envirograf HW01 and HW02E Intumescent coatings
Can be applied over existing paint systems or wood stains to improve adhesion of the fire protection coating to the substrate
Application by brush or roller
Envirograf Stabond Stabilising Bonding/Sealing Liquid is a transparent water based bonding/sealing liquid:
Used to prime/seal surfaces which may be absorbent, dusty or friable prior to painting/bonding
Ideal for plaster ceilings or walls (to seal the surface over old flaky plaster or new plaster)
And sealing wood when using Product 38...
Envirograf ES/VFR is a Clear Fire Protection Coating for wood and timber.
ADVANTAGES
British Standard Class 0 & 1 and EU standard B/s1/d0
Water-based for internal/external use
Can be used as part of an economically priced Envirograf system
Easy and safe to apply
Delivers long-term protection and fire resistance
Also available in a...
Envirograf ES/VFR White Fire Protection Coating is a white coloured, water based fire retardant coating for wood, and certain wood-related products:
Suitable for upgrading new and already coated timber surfaces to British Standard Class 0 & 1 and EU standard B/s1/d0
Hard wearing for internal and external use
Must always be finished...
Thermoguard Flame Retardant Anti-Graffiti Clear Glaze is an exceptionally smooth, hard and impermeable clear two-pack flame retardant coating for internal and external use. It is a water-based, high durability two-pack coating system, designed to enable removal of graffiti through use of graffiti removers. The chemically cured coatings provide...
Thermoguard Wallcoat is a white intumescent basecoat (part of a complete system) to upgrade potentially dangerous ‘multi-layer’ - previously painted - walls & ceilings in communal areas:
Controls surface spread of flame and fire propagation to Class 0 & EN Class B
Achieves EU and new British safety standards on walls and ceilings...
Thermoguard Timbercoat is a durable fire protection paint for interior and exterior timber surfaces:
Meets new Fire Regulations standard:
BS EN Class B s1 d0, BS Class 1
Class O Surface Spread of Flame
Can also achieve 30 & 60 minutes Fire Resistance in certain instances
Expands to create a barrier, insulating wood from heat and...
Thermoguard Fire Varnish Basecoat is a clear intumescent varnish that is the first coat of a 2 coat system (3 coats externally) for the decorative Fire Protection of timber and timber derived substrates to Class 1, Class 0, EN Class B s2 d0. See Thermoguard Fire Varnish Overcoat (Exterior) to complete the system.
Complete systems including...
All of the intumescent paints we offer have been tested to varying British/European standards by recognised independent third parties depending on their required use and performance. In addition to these industry standard tests, some products also offer additional paperwork after use by way of a ‘certificate’ that can be obtained in different ways - manufacturer dependent. Some require a form to be completed and returned by email, others have online application forms, others can be simply called to provide project details verbally. Not ALL products offer this additional supplement and if this type of certificate is important to your project you should contact our Technical Team on 0113 2455450 (option 2) or [email protected] to advise them of this so they can ensure they recommend a suitable product accordingly. Certain larger projects may also require the involvement of an independent inspector, again you should contact our Technical Department to discuss this if required.
Our help and advice promise
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. Whether it’s structural steel in a warehouse, fire retardant paint for wood on a new-build, or the internal walls of a block of flats, we can provide a full specification and offer guidance throughout the project.
