Sub-category links
Filter By
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Product Type
Product Type
Fire Rating
Fire Rating
Interior / Exterior Use
Interior / Exterior Use
Colour Family
Colour Family
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
There are 116 products.
Active filters
A quick drying, one pack alkyd primer, Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes.For the maintenance of above water areas Approved for the carriage of grain when used as part of an approved scheme For use at Maintenance & Repair or On Board Maintenance...
International Interprime 306 is a single component, fast drying, high build alkyd primer used as a shop applied post-fabrication primer specifically designed for a blast, fabricate and prime steel production route, and where fast drying and rapid handling properties are required. Coverage Calculator More Information Delivery Info
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product.As a primer for steelwork intended for use in a wide range of aggressive environments,...
International Intertherm 50 is a single component, high temperature coating, suitable for temperatures up to 540°C (1004°F) for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, etc. Coverage Calculator More Information Delivery Info
International Intergard 1735 is a high performance, low VOC, water borne two component epoxy with a high gloss finish. Tough, hard wearing chemically resistant epoxy finish Suitable for most circumstances where the odour or emissions from solvent based coatings are unacceptable 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS...
International Thinner/Equipment Cleaner GTA713 is used for thinning compatible International products. It can also be used for the general cleaning of surfaces and equipment after using the associated paint or coating. More Information Delivery Info
International Interthane 870 is high build which means it can reduce the number of coats you require and keep costs to a minimum. Semi-gloss and available in 4,800+ colours (including RAL 9007 Grey Aluminium), International Interthane 870 delivers excellent cosmetics and extended recoatability in both new construction and as an industrial...
International Interseal 670HS (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures. The product is still a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel and a...
International Intercure 384 is a two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977As a high build intermediate to provide...
International Interfine 629HS is a low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention.Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide variety of aggressive environments including...
International Intergard 5000, a 2 part universal epoxy anti-corrosive primer for use as a one or two coat system which can be applied directly to mechanically prepared shop primer or grit blasted, hydroblasted or mechanically cleaned surfaces. For use at Newbuilding, Maintenance & Repair or On Board Maintenance.Certified for approved...
International Intercryl 525 is designed for use as a primer/finish for structural steel, in a wide variety of general industrial environments of light to moderate corrosivity, including on bridges, commercial buildings, infrastructure and manufacturing plants.Excellent colour and gloss retention 4,800+ colours, inc. RAL, RAL Design &...
Sub-category links
Filter By
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Product Type
Product Type
Fire Rating
Fire Rating
Interior / Exterior Use
Interior / Exterior Use
Colour Family
Colour Family
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
International Protective Coatings are part of AkzoNobel who are world leaders in performance coatings technology and innovation, with a global reputation for quality and reliability. Offering in-depth knowledge and expertise in areas as diverse as fouling control, color matching, surface design and fire protection, their innovative and sustainable technologies are used in everything from construction and consumer electronics to transport and sports equipment.
Supported by a leading team of R&D specialists, International has an extensive portfolio which includes high performance paints and coatings for ships, yachts, cars, trucks and buses, industrial installations, structural steel, architectural components, beverage cans, furniture, aircraft, mobile devices and flooring.
Their customers include many of the world's leading companies, such as Airbus, BP, Boeing, Bosch, Dell, Ford, IKEA, Philips, Samsung, Shell, Toyota and Whirlpool.
International Paints products at Rawlins Paints include the ranges Interzone, Interbond, Interchar, Intercryl, Intercure, Interfine, Intergard, Interlac and Interline. Their products, such as International Interzone 954, are used on marine environments, where there is large amounts of tidal movement, such as with offshore oil rigs. One of their popular products is International Interthane 990, a two component acrylic polyurethane finish, which is durable and provides a longt-term recoatability.
Many of the International products can be applied by roller, brush and/or spray paint tools. For more information about this brand, please contact Rawlins Paints by email or phone.
