Filter By

CLEARANCE - Axalta ViterClad 50 Finish

Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...

Price £55.81 Regular price £111.63
In stock

CLEARANCE - Bradite One Can

Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...

Price £9.99 Regular price £19.95
In stock

CLEARANCE - Bradite Industrial Degreaser

Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...

Price £5.69 Regular price £11.38
In stock

CLEARANCE - Bradite Pre-Treat Galvanised Steel

Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...

Price £5.25 Regular price £10.51
In stock
All sale products

Need Help?

Intumescent Mastic

Fire-rated mastics for sealing around fire barriers and penetrating pipes and services on a range of substrates and surfaces, such as brick, block and plasterboard. Helps prevent spread of smoke and fire through gaps and cracks.

Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.

For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.

There are 7 products.

Showing 1-7 of 7 item(s)

Active filters

Thermoguard Intumescent Mastic

Thermoguard Intumescent Mastic is an easy to apply, intumescent sealant that provides a 5 hour fire barrier coupled with excellent sound reduction properties. Permanently flexible and excellent slump resistance it is ideal for sealing gaps around fire doors, window frames and for sealing joints, voids and irregular holes in fire rated...

Price £3.00
In stock

Astroflame Intumescent Acoustic Acrylic Mastic

An easy to apply, intumescent sealant that provides a 5 hour fire barrier coupled with excellent sound reduction properties. Permanently flexible and excellent slump resistance it is ideal for sealing gaps around fire doors, window frames and for sealing joints, voids and irregular holes in fire rated structures.

Price £4.80
In stock

Envirograf AM Mastic

This Intumescent Acrylic Mastic is high-pressure for fire protection in joints & between door frames, partitions & walls, around RSJ's, providing a permanent & flexible seal against fire, smoke and toxic fumes. Good adhesion to all materials. Can be over-painted Standard mastic tube For gaps between 1mm & 60mm Touch dry...

Price £3.31
In stock

Firetherm Intumastic HP

Firetherm Intumastic HP is a heat-reactive, intumescent acrylic fire barrier mastic for internal use around services in walls and floors. Seals around pipes, cables and cable trays Provides up to 4 hours of fire resistance 60 to 120 min tack time (depending on temperature/humidity)

Price £6.23
In stock

Firetherm Intumastic ADL

Intumastic ADL is a medium viscosity, fire rated mastic for sealing around services and fire-stopping applications in dry internal projects. Use around cables and cable trays, fire batts, ducting and joints - see description for more Provides up to 240 minutes of fire integrity and insulation Can be painted over once fully cured...

Price £1.98
In stock

Firetherm Intumastic

Firetherm Intumastic seals around dry internal joints, pipes and services to insulate and prevent the spread of fire and smoke for up to 240 minutes. Tack free between 15 minutes and an hour Can be over-painted once fully cured Use in movement joints - allows up to 30% movement Optifire Identification Air pressure tested up to 2000 Pa...

Price £1.69
In stock

Firetherm Intumastic Brush Grade

Use Firetherm Intumastic Brush Grade to coat mineral fibre batts and slabs already in situ, where fitting batts and then coating later is more effective on a project. Provides up to 4 hours fire resistance Brush-grade specification Internal application only

Price £31.19
In stock