Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Intumescent Pipe Sleeves
Protect pipes running through brick, concrete and plasterboard from corrosion with pipe sleeves. Lined with intumescent material, they expand when attacked by fire to seal gaps around metal and plastic pipes to stop the spread of smoke and flames through fire barriers, and allow pipes to expand and contract without compromising protection.
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.
Cast in Concrete Pipe Sleeves with intumenscent lining for setting into concrete and bored holes to allow passage of services (cables, pipes, etc) through fire-rated floors. Refer to sleeve sizes below Includes removable end caps Caps can be cut to accomodate services Suitable for industrial and domestic use
Envirograf Intumescent Toilet & Bathroom Ventilation Outlet Protection for wall and ceiling outlets that connect to toilet and bathroom ventilation fans, up to an hour of fire protection. See sizes below Easy installed in minutes Can be bent to fit curved PVC pipes Liners available for cavity walls, suspended & plasterboard...
CLVM Clipper Range Toilet Ventilation Fire Protection for toilet and bathroom ventilation fan units on ceiling or walls, protecting PVC and flexible PVC pipes from fire with intumescent material inside the top and at the base, fixing into place. Up to 90 minutes fire protection Slides over PVC pipes Simple to fit Refer to sizes below
Firoblock Sleeves for expanding and contracting pipes that run through fire-rated walls & ceilings. Also protects pipes against corrosion from contact with concrete & cement, and cables in trunking and on cable trays. Refer to sizes below Up to 4 hours fire protection Easily fitted from above & below ceilings Easy to cut No...
Use Intumescent Wall Sleeves for metal and plastic pipes that run through brick, block, concrete and plasterboard, allowing them to contract and expand, and providing fire and smoke protection. Refer to size guide below Simple to install Protects copper pipes from corrosion Cuts easily with a knife Joins with tape Expands in fire,...
Use Intumescent Wall Sleeves for ventilation ducting that runs through brick, block, concrete and plasterboard, expanding in fire providing fire and smoke protection. Simple to install Cuts easily with a knife Joins with tape Expands in fire, sealing gaps
Firetherm Intusleeve, an intumescent steel sleeve for combustible pipes, providing up to 4 hours fire resistance for pipes passing through fire-rated walls and floors, and cavities in stud work walls. Ultra-slim design Up to 4 hours of fire resistance Less obtrusive than externally fitted fire collars A great solution for angled pipes
Firetherm Intusleeve, fire protection for plastic air ducts passing through fire compartment walls and fire barriers. Length of sleeve is relative to the width of the wall and the seal - this should be specified when placing an order. Intumescent-lined, crushing heat-softened ducts. Metal sleeves fit around ducting and slide into...