The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Lubricant sprays are a great way of speeding up the repair process and making your life that little bit easier. Whether it be oil, grease and tar removal, temperature reduction, anti-seize or removing an irritating squeak, Rust-Oleum's aerosols are indispensable. We have sprays for application to welding, hinges, slides, gears, electronics, precision equipment, boilers, engines, exhausts, water pumps, heat exchanges, switches, cables, and more. Cleaning is always essential in a good maintenance project. It allows substrates to bond and creates a job that should be long-lasting and not have to be repeated at a sooner date. Take advantage of these affordable, easily-applicable cleaners to create a solid foundation for any project you may be undertaking.
Most of us have struggled with a rusty bolt or stubborn hinge at some point in our decoration or maintenance chores. Trying to loosen the gears of a bike for example, or the hinges of a door can be brutally difficult if they are corroded and effectively welded into place. With the use of the X1 aerosol range from Rust-Oleum, these jobs can become a walk in the park. They have created a spray for near every eventuality, so simply double check the features and benefits, examples, and pick the right product for your project. When using aerosols, be aware of the safety implications which can be found on both the Product Data Sheet and the Safety Data Sheets at the bottom of the project page. Be sure to wear eye protection at all times and use gloves if advised to do so. If you have any concerns or are unsure on which product you may need, please give our Technical Support Team a call on 0113 245 5450.
A general purpose lubrication fluid developed by Rust-Oleum that protects and cleans metal and plastic parts. This excellent penetrating fluid has anti-corrosive and water repellent properties. It leaves a protective film layer after use. Stops squeaking Creeping properties Displaces water A film layer is left on the surface after...
A high purity, light lubricant from industrial paint manufacturers Rust-Oleum, containing PTFE. Suitable for applications requiring a clean, light film it has outstanding lubrication and water repellent properties. High anti-wear characteristics Contains PTFE Water repellent Ultra low friction coefficient Clear clean formula
A high quality technical spray manufactured by Rust-Oleum that effectively prevents the adhesion of weld spatter to metal surfaces. It protects welded materials from corrosion. Stops squeaking Creeping properties Displaces water A film layer is left on the surface after cleaning Does not contain silicon
Rust-Oleum X1 Electrical Cleaner Spray is a fast evaporating Rust-Oleum solvent cleaner suitable for cleaning electronics, electrical components and other precision equipment. Leaves no residue Fast to evaporate Low odour Removes dirt, oil, wax etc.
Rust-Oleum X1 Ceramic Anti-Seize Spray is a ceramic based grease, capable of withstanding extreme pressures and temperatures. This Ceramic technology by Rust-Oleum leaves an inert barrier of microscopic platelets long after the grease fails due to high temperatures. It provides with an ultra-thin film, giving lasting lubrication and...
A high quality foam cleaner/degreaser from the Rust-Oleum product range which dries leaving no visible residue and is safe to use on most hard surfaces and fabrics. Cleans light contamination of grease Leaves no residue or streaks after use Suitable for fabrics and upholstery Non abrasive Contains no silicones Foaming action deal for...
Rust-Oleum X1 Freeze & Release Spray is a high quality rust releaser to loosen rusted parts by shocking, with a rapid temperature decrease and then using an advanced chemical action to penetrate, lubricate and release the components. Water repellent Shocks components with rapid temperature reduction
Rust-Oleum X1 White Grease Spray is a multi purpose, high quality white grease giving excellent lubrication, water and heat resistance. Stops squeaking, is water repellent, corrosion preventive and does not contain silicone so is body shop safe. Stops squeaking Water repellent Corrosion preventive Suitable for vertical surfaces, will not...
Rust-Oleum X1 Chain & Drive Spray is a high quality spray with effective anti-fling properties for lubricating gears and chains. Reduces friction and helps prevent wear on chains and open gears which are liable to heavy load. It withstands extreme loads and temperatures and has an ultra-low coefficient of friction. Good adhesion...
Rust-Oleum X1 Heavy Duty Cleaner-Degreaser is a heavy duty solvent based, water washable cleaner degreaser which will remove oil, grease, tar etc. from most durable hard surfaces. Can be rinsed off components with water Removes grease, oil, tar etc. Quickly penetrates grease and oil
A high quality odourless and colourless superfine dry lubricant which possesses excellent thermal stability, for all types of general purpose lubrication applications. Dry lubricant Stops squeaking Water resistant and repellent Good chemical resistance Nonstick - no mess lubrication
Rust-Oleum X1 Cutting & Tapping Spray is a specially formulated cutting fluid which lubricates and cools the cutting tools and work piece for every form of metalworking such as cutting, drilling, sawing and tapping. Reduced friction leads to better surface finish Increases process speeds Non silicone Contains extreme pressure...
The Rust-Oleum X1 Range:
- Multi-Purpose Spray
- PTFE Spray
- Multi-Purpose Weld Spray
- Electrical Cleaner Spray
- Ceramic Anti-Seize Spray
- Mutli-Purpose Foam Cleaner
- Freeze & Release Spray
- White Grease Spray
- Chain & Drive Spray
- Heavy Duty Cleaner-Degreaser
- Silicone Spray
- Cutting & Tapping Spray
- Stainless Steel Cleaner
To open a Credit Agreement Trade Account at Rawlins Paints, simply click on the link below to download a Account Application Form. Once filled in, please return the Application Form to [email protected]
Alongside standard Technical and Sales Support Rawlins Paints offers to its customers, Credit Agreement Trade Account members will also benefit from:
- 30 Days Credit
- Preferential Pricing
- Access to Training
- Further Guarantees and Warranties
- And More
For further information, contact [email protected]awlinspaints.com
Download you Credit Agreement Trade Account Application Form here.