Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces.
See further below for representations of available translucent wood stains - these are shown in the colour picker as solid colours
Certificate Application
Zeroflame Fire Retardant Treatment is for use on wood and timber:
Soaks virtually ‘invisibly’ into woods and timber
Achieves Euroclass B (BS Class 0) Fire Propagation and Spread of Flame fire protection on solid timbers
Can be overcoated for decorative purposes
For internal and external use
Simple Certification Application following...
Thermoguard Wallcoat 30 & 60 Minute System for Plasterboard is a coloured intumescent paint system for interior plasterboard and cement board ceiling and wall surfaces. These packs have been created to help users ensure they are purchasing sufficient product for their project. Each pack contains the correct amount of basecoat (Wallcoat)...
Thermoguard Wallcoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior plasterboard ceiling and wall surfaces. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers...
Zeroflame Fire Retardant Paint is a matt white, single-pack waterborne coating for wood, and other wood derivatives that achieves Class 1 and Class 0.
Achieves the equivalent to Class 0 and Class 1 to EU Standard EN13501-1:2007
Can be over-coated with waterbased latex paints
Simple certificate application following purchase and...
Zeroflame Aquasteel WB+ is a white thin-film waterbourne intumescent coating with a new and improved formula designed to provide 30 and 60 minutes fire resistance on standard structural steel members in internal envoronments. It provides an easier and more efficient alternative to cladding steel members in plasterboard.
New improved...
Zeroflame Fire Retardant Treatment is for use on wood and timber:
Soaks virtually ‘invisibly’ into woods and timber
Achieves Euroclass B (BS Class 0) Fire Propagation and Spread of Flame fire protection on solid timbers
Can be overcoated for decorative purposes
For internal and external use
Simple Certification Application following...
Bollom Brosteel Ultra 60, is a new and improved revolutionary thin-film waterborne white intumescent paint for standard, interior structural steel members, providing 30 minutes fire protection in only one coat and 60 minutes in two coats - see below for details.
For internal use only
Water-based - quick drying thin-film intumescent...
Jotun Steelmaster 1200WF is a one component waterborne acrylic thin film intumescent coating independently tested and approved for fire protection of structural steel exposed to cellulosic fire up to 180 minutes. Suitable for properly prepared carbon steel substrates.
**Available for delivery - see Delivery Options below**
Thermoguard Timbercoat 60 Minute System is a coloured intumescent paint system for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Smoke and Flame Retardant Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in...
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces.
See further below for representations of available translucent wood stains - these are shown in the colour picker as solid colours
Certificate Application
Thermoguard Steel Fire Paint Primer is a dual-purpose decorative water-based flame retardant paint finish for use over Thermoguard Thermocoat W and primer for structural steel & cast iron.
Protects intumescent paint
Use in conjunction with Thermocoat W and Thermocoat S for fire resistance of up to 30, 60, 90, 120 mins (see data sheet...
Thermoguard Thermocoat WI is a water-based intumescent paint system providing fire resistance to structural steel and cast iron with a minimum number of coats. A compatible decorative overcoat system ensures the system will enhance the building’s architectural and design features.
Optimised for Universal Beams, Columns and other open...
Thermoguard Thermocoat WO Ultimate is a water-based intumescent paint system providing fire resistance to structural steel and cast iron with a minimum number of coats. A compatible decorative overcoat system ensures the system will enhance the building’s architectural and design features.
Optimised for CHS, SHS and RHS hollow sections...
Bollom Brosteel Ultra 60 - 30min System for Hollow Sections is a pack that provides sufficient intumescent basecoat (Bollom Brosteel Ultra 60) and coloured topcoat (Bollom Flameguard Ultra Vinyl Matt, Bollom Flameguard Ultra Acrylic Eggshell or Bollom Flameguard Ultra Gloss) to protect suitably primed, standard Square, Rectangular and Circular...
Bollom Brosteel Ultra 60 - 30min System for Universal Beams & Columns is a pack that provides sufficient intumescent basecoat (Bollom Brosteel Ultra 60) and coloured topcoat (Bollom Flameguard Ultra Vinyl Matt, Bollom Flameguard Ultra Acrylic Eggshell or Bollom Flameguard Ultra Gloss) to protect suitably primed, standard ‘ɪ’ shape...
All of the intumescent paints we offer have been tested to varying British/European standards by recognised independent third parties depending on their required use and performance. In addition to these industry standard tests, some products also offer additional paperwork after use by way of a ‘certificate’ that can be obtained in different ways - manufacturer dependent. Some require a form to be completed and returned by email, others have online application forms, others can be simply called to provide project details verbally. Not ALL products offer this additional supplement and if this type of certificate is important to your project you should contact our Technical Team on 0113 2455450 (option 2) or [email protected] to advise them of this so they can ensure they recommend a suitable product accordingly. Certain larger projects may also require the involvement of an independent inspector, again you should contact our Technical Department to discuss this if required.
Our help and advice promise
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. Whether it’s structural steel in a warehouse, fire retardant paint for wood on a new-build, or the internal walls of a block of flats, we can provide a full specification and offer guidance throughout the project.
