- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Need Help?
Mapei Products
Mapei Mapefloor I 302 SL
Two-component multi-purpose epoxy formulation with high solids content for industrial floors, in compliance with standards applied to foodstuffs industry, cleanrooms and to the Radon gas tightness. Used to create self-levelling or multi-layer resin coatings on floors to form an attractive, smooth or non-slip finish. Some application examples:...
Mapei Mapefill GP
General purpose non-shrink grout, recommended for grouting voids in structural elements such as filling gaps in precast elements, and grouting base plates and bridge bearings.Anchoring of mechanical equipment and of steel bars Filling of rigid joints between elements in concrete and precast concrete structures Execution of underpinning...
Mapei Mapethene Primer
Mapethene Primer is used as a primer for self-adhesive bitumen membranes from the Mapethene line.Ready to use Applied by brush, roller or spray Quick drying Solvent-free Please note this product is subject to a minimum order quantityFor professional use only.More Information Delivery Info
Mapei Mapelastic Zero
Two-component flexible cementitious mortar for waterproofing and concrete protection. Available in grey. Designed for application on concrete, renders, cementitious screeds, lightweight cement blocks, external-grade plywood, and plasterboard. Provides waterproofing and protection for balconies, terraces, bathrooms, swimming pools, and...
Mapei Mapeflex PU45 FT Sealant
Mapei Mapeflex PU45 FT Sealant is a paintable, rapid, high modulus polyurethane sealant and adhesive, specially developed for sealing expansion and distribution joints in horizontal and vertical surfaces, including those which are subject to occasional chemical attack by hydrocarbons.From the 24th August 2023, adequate training is required...
Mapei Mapegrout Hi-Flow
Shrinkage-compensated, fibre-reinforced mortar for concrete repair. To repair structures where particular thicknesses and the state of deterioration require the use of high flow mortars. Mapegrout Hi-Flow is suitable to repair bridge structure where a flowable repair concrete is required and complies with the HE standard for repairing such...
Mapei Mapecure SRA
Curing admixture with the ability to reduce hydraulic shrinkage and the formation of micro-cracks. Typical application in Construction and repair of:Floor joists and motorway viaduct piers Industrial floors Multi-storey car parks Hydraulic works, such as canals, overflow channels, tanks, etc Prefabricated concrete elements such as...
Mapei Adesilex PG1 Rapido
Two-component, ultra rapid-setting thixotropic epoxy adhesive for repairs, bonding and structural strengthening of concrete, reinforced concrete, natural stone, mortar and brickwork structures.Structural strengthening of beams and pillars by bonding steel plates (béton-plaqué technique) or composite material (such as Carboplate) to...
Mapei Adesilex PG1
Structural repair, bonding and reinforcement of concrete elements, natural stone, mortar and brick with very low emissions of volatile organic compounds (EMICODE EC1 Plus).Structural reinforcement of beams and pillars by bonding steel (béton plaqué method) or composite material (e.g. Carboplate) plates to concrete Non-flexible structural...
Mapei Planitop Smooth & Repair R4
Structural R4-class, rapid-setting, shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete.Structural repairs and smoothing over internal and external horizontal and vertical concrete surfaces Suitable for repairing structures exposed...
Mapei Mapegrout Fast-Set Rapido
Fast-setting and drying, shrinkage-compensated, fibre-reinforced mortar for repairing exterior vertical and horizontal deteriorated concrete surfaces. Application examples include:Restoration of deteriorated concrete structures, edges of pillars, beams, and balconies damaged by the oxidation of reinforcing rods Fast repair of industrial...
Mapei Primer SN
Specifically formulated to carry out preliminary priming treatments on surfaces before applying epoxy and polyurethane resin systems from the Mapefloor range, self-levelling cementitious mortars from the Ultratop/Ultratop Living range and of Ultratop Loft, to protect and coat civil and industrial floors, terrazzo floors and cementitious...
Mapei Topcem Pronto
Mapei Topcem Pronto is a ready-to-use, normal setting, quick-drying mortar with high thermal conductivity.For forming unbonded and bonded screeds on new and existing slabs in interiors and exteriors prior to installing wood, PVC, linoleum, ceramic tile, natural stone, carpet or other floor coverings in areas where fast-drying screeds are...
Mapei Primer G
Synthetic resin-based water-dispersion primer with very low volatile organic compound (VOC) for treating gypsum surfaces prior to installing ceramic tiles, as an anchoring coat for gypsum-based sprayable plasters, and to improve the adhesion of smoothing compounds on cementitious or anhydrite and gypsum-based surfaces. Some application...
Mapei Adesilex VS45
Mapei Adesilex VS45 is a hard set dispersion adhesive, specific for resilient wall coverings on absorbent substrates.For professional use Very easy to apply & short waiting time Used for bonding homogeneous and heterogeneous PVC wall coverings, multilayer PVC wall coverings & LVT (Luxury Vinyl Tiles) Solvent free, non-flammable...
Mapei Mapegrout T60
Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. Repair of degraded concrete structures or reinforced concrete structures subject to sulphate attack.Canal linings, hydraulic works, and tunnels that require resistance to sulphate attack Repair and reconstruction of concrete coverings damaged by corroded...
Mapei Mapewrap Primer 1
Epoxy primer specific for the MapeWrap system, preparing concrete, reinforced concrete or masonry surfaces, a necessary procedure for bonding MapeWrap fabrics.For professional use onlyMore Information Delivery Info
Mapei Ultrabond Eco S940 1K
Silylated polymer-based adhesive with very low emission of volatile organic compounds. For professional use. Water and solvent free. Suitable for all types of pre-finished plywood flooring and medium-sized wooden planks. Also suitable for heated substrates.More Information Delivery Info
Mapei Mapefloor Filler
A special, very hard, microcrystalline filler material used to create surfaces with a non-slip finish. Some application examples:In polyurethane finishes and coating products such as Mapefloor Finish 50 N, Mapefloor Finish 52 W, Mapefloor Finish 53 W/L, Mapefloor Finish 54 W/S and Mapefloor Finish 58 W In epoxy finishes and coating...
Mapei Epojet
Two-component, super-fluid epoxy resin for injections and anchorings.Monolithic repair of structures with cracks or fissures caused by heavy loads, accidental impacts and earthquakes Bonding and reinforcement of structures by low pressure injection Precise anchoring of metallic structures Many more features and benefits below For...
Mapei Mapecure E 30
Film-forming curing compound in water emulsion for concrete, to protect fresh concrete from rapid water evaporation caused by wind or sunlight and to reduce surface cracking. Especially recommended for protecting concrete structures such as:Industrial floors Exterior paving (road, parking lots) Airport runways, renders, dam faces...
Mapei Mapemortar HB R3
A medium strength, high build, shrinkage compensated repair mortar for repairing damaged concrete surfaces in overhead, vertical and horizontal situations, where a medium strength high build mortar is required.Meets EN 1504-3 R3 classification Repair of damaged concrete surfaces, corners of beams, columns and other concrete members...
Mapei Planitop Fast 330
Rapid-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied at a thickness from 3mm to 30mm to smooth out irregularities.Levelling reinforced concrete surfaces in swimming pools to make them ready to receive (after just 24 hours at 20°C) Mapelastic and Mapelastic Smart waterproofing...
Mapei Primer 3296
Primer 3296 is for consolidating and improving the characteristics of weak, crumbly or powdery surfaces. It is also suitable for outdoor use for consolidating the surface of concrete slabs, screeds, renders, bricks, sandstone, tuff, cement and lime-based decorative mortar.Acrylic primer in water dispersion for consolidating porous surfaces...
Mapei Aquaflex Roof Plus
A ready-to-use, high-elasticity, quick-drying, UV resistant liquid waterproofing membrane. For waterproofing: Flat, sloping and curved roofs and roofs with a complex shape New flat roofs and repairs to existing flat roofsFor professional use only. Please Note: 20KG Pack Sizes are made to order subject to a 4-6 week lead time –...
Mapei Mapeband SA
Mapeband SA is a self-adhesive butyl rubber tape used to waterproof fillets between horizontal and vertical surfaces on terraces, balconies and in bathrooms and showers. This tape is a complementary product for elastic waterproofing systems, such as those of Mapelastic and Aquaflex Roof ranges, or such as Mapegum WPS. Used for:...
Mapei Ultratop Anthracite
Ultra-fast setting, self-levelling mortar based on special hydraulic binders for abrasion-resistant flooring, thickness from 5mm to 40 mm. Used internally in public and industrial buildings, for levelling and smoothing new or existing concrete and ceramic substrates in thickness from 5 to 40 mm, to make them suitable for heavy pedestrian use....
Mapei Prosfas
Mapei Prosfas is a solvent-free, silicate-based consolidator for cementitious substrates, with a high penetration capacity. For professional use Deep consolidation of cementitious substrates with an unstable surface or with poor mechanical characteristics Consolidation of cementitious screeds which tend to have a crumbly surface due to...
Mapei Mapenet EM40
Pre-impregnated alkali-resistant A.R. glass fibre mesh (FRP) used to make “reinforced” structural render on concrete and masonry structures. Some application examples:"Reinforced" render on concrete walls and bay walls Increasing the compressive strength of bay walls Strengthening vaulted roofs by "reinforced capping" Systems to prevent...
Mapei Eporip
Mapei Eporip is a two-component solvent-free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.For professional use only Monolithic construction joints between fresh and hardened concrete Bonding precast concrete elements, and bonding steel to concrete Filling cracks in concrete Construction joints...
Mapei Mapefer 1K
A one-component corrosion-inhibiting cement mortar for the protection of reinforcing rods. Ideal for re-alkalising corrosion-inhibiting protection for reinforcing rods in the repair of concrete carried out with Mapegrout shrinkage-compensated mortars, or for underground concrete construction.Adhesion improver for concrete repair mortars...
Mapei Idrostop B25
Mapei Idrostop B25 is a hydro-expansive, bentonite jointing tape for sealing the second pour of concrete in civil and industrial building work.After expanding upon contact with water, Idrostop B25 adapts perfectly to the volume defined by the surrounding boundaries. Thanks to this property, it offers a perfect seal between the second pour...
Mapei Mapeproof Swell
Mapeproof Swell is a single component hydro-expansive paste, supplied in cartridges, specially developed to form flexible, waterproof seals in cracked reinforced concrete or in prefabricated elements with infiltration of water.May be applied on damp or uneven surfaces May be used at any temperature and with any kind of water which...
Need Help?
Need Help?
Construction sites around the country count on Mapei products day in day out - Rawlins Paints are UK stockists of the full Mapei range of concrete screeds, repairs, waterproofing and sealing.
Mapei's range of products meet all the needs of the building trade, with particular focus on sustainability, durability and high-quality materials. Mapei's involvement stretches all around the globe including major projects in key infastructure (suspension bridges, tunnels, canal systems), sports stadiums, transport networks (train stations, airports), and iconic construction projects such as towering skyscrapers and urban redevelopment programs.
Mapei's products are used in major projects around the UK, providing hardwearing repairs to some of our most iconic structures and places:
Birmingham New Street Railway Station
Mapei supplied products for the installation of ceramic tiles and resins for flooring in he busiest train station outside of London, with 100,000's of passengers passing through every day.
Bank Station capacity upgrade project
This key part of London's transport network used Mapei's extensive product range for waterproofing, repairs to the concrete and masonry, as well as a new construction and structural reinforcement.
Heathrow Airport - Terminal 5
During its construction phase between 20220-2008, Mapei suppled products for preparing screeds, treating floor substrates and laying ceramic tiles and conglomerate stone slabs in the main concourse, international departures and VIP areas, as well as in some shops and service areas; laying resin floorings in the corridors, in the rail station and in the maintenance areas.
Menai Suspension Bridge
Opened in 1826, Mapei specified concrete restoration systems for repairs required for two corbels of the bridge.
