The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Marine paints for other areas of boats and offshore infrastructure that also require maintenance from time to time. Smooth and anti-slip deck paint, bilge paint, boot-topping, low friction coatings for ice breakers, surface tolerant epoxy for tidal zones, high-build cargo hold coatings and more.
This category contains paints that are for specific uses in the marine sector and are better performing than general coatings for the same use.
Teamac, International and Jotun are paint creators that the offshore and marine industries heavily rely upon. International are based in the North East, famed for its port activity, Jotun specialise in robust chemicals and began in Norway, also renowned for their industries at sea, whilst Teamac are marine specialists based in Hull – another thriving port.
Teamac Bilge Paint, provides protection for the inside surfaces of the hull below the water line. A resilient and hardwearing single pack coating providing available in 4 colours. Advantages Hardwearing and resilient Single Pack formulation Use on inner hull walls Suitable for use on wood, metal and GRP Click to jump down to...
Teamac Black Tar Varnish, is a synthetic tar varnish for industrial, agricultural and marine use. It is used for the protection of (weathered) wood, metal and other surfaces, inside or outside and should be used on barns, farm buildings, roofs etc. and marine applications. Advantages Synthetic tar varnish Weathered surface protection...
Teamac Boot-topping, is an interface coating for use between the waterline and the deck coatings, provides a hard surface less receptive to marine growth and is polish-able to remove grime. Advantages Easy to apply Water and weather resistant Industrial grade marine coating Very hard wearing solid finish Click to jump down to...
Teamac Deck Paint Smooth, is a conventional, durable, protective coating for wood and metal decks. It can be used on suitably prepared wood and metal decks as well as directly to GRP decks. Advantages Protective. Good durability. Suitable for wood, metal and GRP. Click to jump down to Technical Data
Teamac Suregrip Deck Paint, is a modified alkyd, ready mixed, aggregated deck coating which provides a rough anti-slip finish when dry Suitable for: Foot traffic Light truck traffic Use on wood Use on metal Use on concrete Use on GRP Available in a range of colours Click to jump down to Technical Data
A surface tolerant from Jotun that is a high build epoxy coating suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water.
Jotun Marathon IQ GF is a two component polyamine cured epoxy coating that is high build, solvent free, glass flake reinforced and is highly scratch resistant. Suitable for environments with very high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly...
Jotun Jotaguard 690 is a two-component polyamine cured pure epoxy coating that is fast drying and has superb mechanical strength. ADVANTAGES Easy to clean Long lasting Reduced application costs Impact/abrasion resistant Less downtime Certificated
Jotun Jotaguard 690 S is a two component polyamine cured pure epoxy coating that is a fast drying, high solids, high build product. It has excellent abrasion, impact and scratch resistant and is specially designed as a premium finish coat for cargo holds where extended repair intervals are required, even when operating with the toughest exposure.
Jotun Jotaguard 660 is a two component polyamine cured pure epoxy coating that is a fast drying, surface tolerant, very abrasion and impact resistant, high solids, high build product. Specially designed as a high performance coating for cargo holds it can be used as primer or finish coat in atmospheric and immersed environments.
Jotun Jotaguard 630 is a two component polyamine cured epoxy coating that is a fast drying, surface tolerant, hard wearing, high solids, high build product. Specially designed for general use in cargo holds and can be used as primer or finish coat in atmospheric and immersed environments.
International Interlac 668 is a one pack, alkyd based, high visibility coating for application to marker buoys and as a safety marker on board ship. International Interlac 668 is for use at Newbuilding, Maintenance & Repair or On Board Maintenance.