Sherwin-Williams Macropoxy 400

Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard (London) for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants...

Price £58.12 Regular price £64.58
In stock

Sherwin-Williams Acrolon C137V2

Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...

Price £52.38 Regular price £58.20
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £46.80 Regular price £52.00
In stock

Rust-Oleum 7100NS Anti-Slip Floor Coating

Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...

Price £34.36 Regular price £38.18
In stock
All sale products

Need Help?

Marine Paint

Painting your boat, whether it’s personal or commercial, fresh or sea water vessel, doesn’t have to be complicated, and it doesn’t have to be expensive. Rawlins Paints stock a wide range of marine paint products, including deck paint, antifouling paint, bilge paint, marine gloss, boot-topping, ice breaker low friction coatings and more.

We also offer products for the harshest marine environments, such as coatings to protect offshore structures that are submerged in tidal areas, as well as commercial trading vessels. If you’re not sure which marine coating you need, call or email our Technical Team for a rundown of our portfolio.

There are 46 products.

Showing 1-12 of 46 item(s)

Active filters

  • Categories: Primers & Undercoats

Teamac Marine Undercoat

Teamac Marine Undercoat, is an interior and exterior, oil based marine undercoat. It is a high opacity undercoat with good flow characteristics for use with Teamac Marine Gloss.  It has been designed to reduce topcoat sinkage and to retain a high gloss finish. Primes and prepares - easy to use Protects and enhances – anti-corrosive &...

Price £15.84
In stock

Teamac Metaclor Antifouling Primer

Teamac Metaclor Antifouling Primer, previously know as Teamac Metaclor Underwater CR Primer, is a strong, versatile, chlorinated rubber based coating for Wood, Metal & GRP.  Suitable for Narrowboats, Cruisers, Barges, Yachts and Marine Applications.  Can be used above and below the waterline, on mixed material surfaces and over any...

Price £18.25
In stock

Teamac Duracote Red Oxide Paint

Teamac Duracote Red Oxide Paint, is a general purpose primer and finish in one.  Teamac Duracote Red Oxide Paint can be used coat on coat direct on to metal and can be used indoors or outdoors and is a very good protector of metals. All round metal protector Use indoor or outdoor Self overcoatable For greater protection apply over...

Price £19.43
In stock

Jotun Vinyguard Silvergrey 88

Jotun Vinyguard Silvergrey 88 is a one component physically drying vinyl coating that is fast drying and can be used as primer or mid coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates. Recommended for topside, deck and superstructure or as a tie coat for anti-fouling systems in the marine...

Price £30.89
In stock

Jotun Safeguard Universal ES

Jotun Safeguard Universal ES is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat between epoxy primers and antifouling systems but can be used as tie coat for a wide range of topcoats. To be used as tie coat in atmospheric and immersed environments. Coverage Calculator

Price £119.19
In stock

International Intershield 300

With a proven 21 years` track record on over 8,700 projects, International Intershield 300 is the offshore industry benchmark in anti-corrosive performance. This unique abrasion resistant, pure epoxy coating, with an aluminium content >9%, offers long term asset protection to offshore structures Unparalleled long term corrosion and...

Price £338.00
In stock

Sherwin-Williams Kem-Kromik 671

Ken-Kromik 671 (formerly known as Sherwin-Williams M671 and as Leighs M671) is a high quality undercoat/tiecoat developed for marine use on above waterline areas but also suitable for normal interior and exterior use. It is a single component, conventional quick drying undercoat/tiecoat. Ken-Kromik 671 may also be used as a wood primer for...

Price £49.75
In stock

Sherwin-Williams Zinc Clad IV 85%

Sherwin-Williams Zinc Clad IV 85% is a two-component, polyamide epoxy, zinc-rich coating. It has a low VOC level and contains 85% by weight of zinc dust pigment in the dried film. 

Price £187.96
In stock

Carboline Carboguard 878

Carboline Carboguard 878 is a high-build epoxy mastic coating used for atmospheric exposed and submerged steel. Excellent film build and edge protection Surface tolerant characteristics Cures at low temperature Self-priming and primer/finish capabilities Meets NORSOK System 7B, Rev. 6 requirement for submerged steel and NORSOK System...

Price £255.00
In stock

Carboline Carboguard 690 GF

Carboline Carboguard 690 GF is a glass-flake filled, cold cure epoxy having excellent film strength and resistance to water, salt water and wastewater exposures. Can be used on a variety of surfaces including structural steel, piping, pilings, ships, offshore structures, and other equipment exposed to industrial or marine environments....

Price £282.38
In stock

Carboline Carboguard 890 GF

Carboline Carboguard 890 GF is a glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets, including marine applications. Surface tolerant characteristics for less severe applications Low-temperature version: 890 LT GF Self-priming and primer/finish capabilities Excellent abrasion to...

Price £85.88
In stock

Carboline Carbomastic 18 FC

Carboline Carbomastic 18 FC is a two-component, fast-curing, heavy-duty, high-build anti-corrosive epoxy coating with a broad and versatile list of uses in marine and other corrosive environments. Excellent immersion performance in both fresh and sea water Suitable as a rust preventive coating in ballast tanks and hull applications...

Price £63.37
In stock

Our ethos is to offer lesser known brands that do not compromise on a quality finish, meaning we can offer products that work at a fraction of the cost of market leaders.

Marine Gloss Paints

Teamac boat paint comes in several types, including Teamac Marine Gloss and Teamac Antifoul paint. Teamac’s marine gloss is a superior marine coating with a high gloss finish, suitable for lots of different marine areas above the water line, including masts, bridge fronts and deck work. It’s available in assorted colours and should be applied by roller or brush.

If you’re looking for a yacht varnish, then Teamac Teamalak yacht varnish is a good choice. It can be used on all wood surfaces where you need a high gloss, UV resistant finish. This could include furniture on deck or woodwork on the outside of the yacht.

Jotun Spontan Varnish is an easy to use, one component coating with a gloss finish, making it an ideal marine varnish choice. As with many of our marine coatings (but not all, so make sure you check!), Spontan can be applied as a spray or with a brush.

Marine Topcoats

Teamac High Performance Finish is a two-pack top coat that will increase the durability of wood, metal and GRP surfaces on your vessel. It’s specifically designed as a marine topcoat and consists of a basecoat and hardener available in lots of assorted colours.

For a combined primer and topcoat for use on marine metal, select Teamac Duracote Red Oxide paint. It’s a general-purpose coating for metal and can be used inside and outside, so it’s perfect for lots of different marine uses.

Deck Coats

It’s important to find the right anti slip deck coating to ensure safety on deck. Teamac Suregrip Deck Paint is a specifically formulated deck coating for sea faring vessels. Already mixed and aggregated, Suregrip deck paint gives a rough anti-slip finish, making it safe for crew members to walk on deck even in rough seas. Available in lots of distinct colours, Suregrip can only be applied with a brush and is suitable for use on metal, wood, concrete and GRP.

Alternatively, Teamac Deck Paint Smooth is a protective coating designed to increase the durability and lifespan of wood, metal and GRP decks. Before you apply this deck paint, you need to make sure the surfaces are dry, clean and free from any contaminants, and if you are applying directly onto GRP you’ll need to abrade the surface before spraying, brushing or rolling the deck paint.

Boot-Topping Paints

Boot-topping paint products are used to paint the area of a hull between the load line and the waterline of a vessel. It’s specifically formulated to provide antifouling qualities in that it’s less receptive to marine growth. It’s also polishable so it’s easy to clean. Teamac Boot-topping paint is a very hard-wearing finish and is water and weather resistant. It can be used directly onto GRP surfaces, but others will have to be primed and prepared properly with a suitable primer product.