The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Rawlins Paints stock a range of marine paint topcoats for application to the majority of primed areas on a boat above and below the water line. Coatings are available featuring a wide colour range in high gloss finishes, provided by Jotun, Sherwin-Williams, International and Teamac, leading trade manufacturers of marine paints.
Marine paint topcoats last longer than most topcoats due to them being specifically developed for tough environments where contact with water, salt spray and year-round weather is expected. Although their primary function is to protect and decorate boats, they are extremely effective when used in other areas on suitably primed timber, metal and GRP.
- Brand: Zinga
Zingalufer, previously known as Alufer N, an intermediate layer or topcoat for existing layers of Zinga in immersed or chemical environments, such as ship hulls and sewage works, providing a protective seal against salt and chemical exposure. Apply by brush, roller, conventional sprayers or aireless spray One pack system Dry in as little...
Zingatarfree (Formally PU Tarfree MIO) is ideal for marine environments and immersion, such boat hulls, with excellent water, corrosion and chemical resistance, and can be used as a replacement for normal coal tar products Single-pack polyurethane paint Use as part of a duplex system with Zinga Apply by brush, roller, conventional...
Marine paint topcoats are available as part of a full system installation on coastal and offshore structures and vessels, including:
- Oil exploration and drilling vessels
- Offshore support vessels
- Offshore production vessels
- Construction and special purpose vessels
- Drill ships
- Jack-up vessels
- Semi-submersible vessels and platforms
- Offshore barges
- Floating platforms
- Fixed platforms
- Anchor handling tug vessels (AHTV)
- Seismic vessels
- Platform supply vessels (PSVs)
- Well-intervention vessels
- Accommodation ships
- Floating production storage and offloading (FPSO)
- Single point anchor reservoir (SPAR) platforms
- Shuttle tankers
- Tension leg platforms (TLP)
- Diving support vessels
- Crane vessels
- Pipe laying vessels
- Compliant towers
- Tension-leg platforms
- Spar platforms
- Normally unmanned installations (NUI)
- Conductor support systems
As well as for canal, river, sea and ocean vehicles and vessels:
Along with marine topcoats for submerged materials and substrates, Rawlins Paints also distribute an extensive range of industrial metal paint systems for power plants and chemical processing facilities which may require specialist tank and pipe lining coatings for water-cooling infrastructures.
Coastal areas, including shipping docks and ports, often require coating systems that can withstand excessive environmental changes for transportation of goods around the world, on vessels included, but not limited to:
- General cargo vessels
- Container ships
- Dry bulk carriers
- Multi-purpose vessels
- Reefer ships
Cargo holds are often subjected to the harshest operating environments, and without specific and successfully installed marine paint systems – primers, undercoats and topcoats – can be subject to impact and abrasion damage, or mechanical damage or failure, from the loading and carriage of dry cargoes across Europe or further afield. As faster loading techniques and equipment is utilised in major ports around the UK and Ireland, installing the correct coating system is imperative to minimising damage, attaining colour retention on all branded surfaces, and protecting surfaces and materials against UV damage and discolouration, salt-water and sea-spray, and more.
Please contact Rawlins Paints’ Technical Support Team for more information about product ranges, including:
- International Paints’
- And more
- Jotun Paints’
- And more
To protect vessels, vehicles, offshore structures and cargo holdings, buy marine coat systems from Rawlins Paints. For additional maintenance and post-repair work redecoration and refurbishment work on metals, GRP, wood and other applicable substrates and materials, use a marine paint topcoat that is compatible and continues the surface protection being delivered by any undercoat system.