Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Colour Family
Colour Family
Size
Size
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
There are 45 products.
Active filters
PPG SigmaShield 460 is a two-component, high solids glass flake reinforced polyamine adduct epoxy coating for long-term protection at areas subject to heavy wear and tear, with very low water permeability, (due to glass flake barrier) and resistance to splash and spillage of a wide range of chemicals.Excellent abrasion and impact...
£380.52 (incl. VAT)
£317.10 (ex. VAT)
PPG SigmaShield 880 (also known as Amerlock 880) is a two-component, high-build, polyamine adduct-cured epoxy coating primarily designed for use in offshore splash zone maintenance such as pipelines, jetties, piling, etc. with outstanding sea water resistance that requires just a single coat that continues to cure when immersed in water....
£68.57 (incl. VAT)
£57.14 (ex. VAT)
PPG SigmaShield 880GF, also known as Amerlock 880GF, a two-component, surface tolerant high solid glass flake epoxy coating designed for use in heavy-duty and corrosive environments for offshore splash zone maintenance.Outstanding sea water resistance - Excellent corrosion resistance Enhanced impact and abrasion resistance - Continues to...
£451.55 (incl. VAT)
£376.29 (ex. VAT)
Jotun Marathon 550 is a two component polyamine cured epoxy coating for carbon steel, galvanised, stainless steel, aluminium and concrete substrates as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. The toughest universal high build epoxy primer for all areas down to ST2 - Engineered for...
£283.10 (incl. VAT)
£235.92 (ex. VAT)
HMG Marine Varnish is a tough and durable clear gloss formulated on a unique blend of polyurethane alkyds for high quality marine and can be used for industrial finishing. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener/thinner:2-Pack System DetailsBase (Part 1) HMG...
£104.57 (incl. VAT)
£87.14 (ex. VAT)
HMG Superthane is a 2K high build, polyurethane coating offering the ultimate levels of chemical resistance, graffiti resistance and superb durability. Superthane has been tested against a wide variety of substances to demonstrate its superb chemical resistance properties. This product MUST be purchased/used in conjuction with its...
£52.73 (incl. VAT)
£43.94 (ex. VAT)
Tikkurila Fontecoat EP 50, a two-component water-borne epoxy topcoat and a single-coat paint recommended for framework, service platforms, conveyors and other steelwork, machinery and equipment. The product has MED (Marine Equipment Directive) certificate no VTT-C-12360-15-18 and is thus accepted for painting surfaces inside ships.Huge...
£318.31 (incl. VAT)
£265.26 (ex. VAT)
Tikkurila Temacoat RM 40, a two-component, resin modified epoxy primer/topcoat that can be used as a single-coat system.Good adhesion to steel, zinc and aluminium surfaces exposed to severe abrasion or chemical stress Suitable for concrete surfaces and has a CE marking Can be used on steel structures in wet environments, e.g. inside...
£59.89 (incl. VAT)
£49.91 (ex. VAT)
Tikkurila Temacryl AR 50, a physically drying, one-component semi-gloss acrylic based topcoat that can be applied at sub-zero temperatures on surfaces exposed to marine or industrial climates and mild chemical stress.Huge colour range available with RAL, BS & NCS shades Easy to handle in the painting process High film-building...
£187.32 (incl. VAT)
£156.10 (ex. VAT)
Tikkurila Temadur 10, a two-component matt polyurethane paint containing anti-corrosive pigments used as a single-coat paint for steel, zinc and aluminium surfaces.Huge colour range available with RAL, BS & NCS shades Can also used as a primer or a matt topcoat in epoxy systems exposed to weathering and/or chemical stress...
£160.00 (incl. VAT)
£133.33 (ex. VAT)
2-pack semi-matt polyurethane paint with 3,800+ colours that can be used as a single-coat paint for steel, zinc and aluminium surfaces with its anti-corrosion pigmentation, and also used as a primer or as a semi-matt topcoat in epoxy-polyurethane systems. It is also suitable for use on uPVC.Resistance to weathering and abrasion MED...
£59.26 (incl. VAT)
£49.38 (ex. VAT)
PPG SigmaGlide 1290 is a 100% pure silicone binder technology fouling release finish coat. Based on a 100% pure silicone binder system, the SIGMAGLIDE 1290 product utilizes a breakthrough dynamic surface regeneration technology to eliminate slime problems and dramatically increase fuel savings throughout service when compared to traditional...
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Colour Family
Colour Family
Size
Size
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Marine paint topcoats are available as part of a full system installation on coastal and offshore structures and vessels, including:
As well as for canal, river, sea and ocean vehicles and vessels:
Along with marine topcoats for submerged materials and substrates, Rawlins Paints also distribute an extensive range of industrial metal paint systems for power plants and chemical processing facilities which may require specialist tank and pipe lining coatings for water-cooling infrastructures.
Coastal areas, including shipping docks and ports, often require coating systems that can withstand excessive environmental changes for transportation of goods around the world, on vessels included, but not limited to:
Cargo holds are often subjected to the harshest operating environments, and without specific and successfully installed marine paint systems – primers, undercoats and topcoats – can be subject to impact and abrasion damage, or mechanical damage or failure, from the loading and carriage of dry cargoes across Europe or further afield. As faster loading techniques and equipment is utilised in major ports around the UK and Ireland, installing the correct coating system is imperative to minimising damage, attaining colour retention on all branded surfaces, and protecting surfaces and materials against UV damage and discolouration, salt-water and sea-spray, and more.
Please contact Rawlins Paints’ Technical Support Team for more information about product ranges, including:
To protect vessels, vehicles, offshore structures and cargo holdings, buy marine coat systems from Rawlins Paints. For additional maintenance and post-repair work redecoration and refurbishment work on metals, GRP, wood and other applicable substrates and materials, use a marine paint topcoat that is compatible and continues the surface protection being delivered by any undercoat system.
