Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 14 products.
Active filters
Remmers Injection Mortar is a fluid mineral filling and injection mortar for strengthening hollow cavity and loose masonry work according to WTA Code of Practice 4-3-98-D. It is also used for filling joints, especially when replacing stones and filling bore holes after impregnation or injection against rising damp in masonry in the Remmers...
Sika Injection 101 RC is a low viscous, fast foaming and solvent-free water-reactive polyurethane injection foam resin, which cures to a dense flexible foam with a fine cellular structure. It is used for the temporary waterstopping of high water intrusions in cracks, joints and cavities in concrete, brickwork and natural stonework.No...
SikaHyflex 250 Facade is a high-performance over paintable 1-part professional weatherproofing sealant for concrete, masonry and EIFS facades. Features & Benefits1-part, moisture curing, and low modulus elastic joint sealant Suitable for movement and connection joints in commercial building envelopes Very good weathering and ageing...
204 Fine Crack Repair is a two pack, solvent free, rapid curing, low viscosity epoxy resin designed for filling smaller cracks, voids and thin section `blow outs` or craters in concrete, brickwork and masonry.Easy to use Very fast cure - hard dry after 1–2 hours at 20°C Low viscosity - 400 cps @ 20°C Suitable for damp or dry surfaces...
Remmers Injection Paste 2K is a cement suspension for injecting cracks and hollow spaces in concrete, mortar, masonry work, natural stone masonry work. Used for strengthening and repairs of building underpinnings in the subsoil and for injection in rock and concrete for the restoration of dam masonry as well as for building repairs.More...
Remmers IR PUR 250 is a flexible one-component PUR injection resin for sealing of water-bearing cracks and porous, water-soaked areas in concrete and masonry.Waterproofing Excellent penetration Moisture-curing Resistant to damaging salts, lyes and acids Solvent-freeProfessional use only - from the 24th August 2023, adequate...
Remmers FM NB (formerly Joint Mortar) is a dry mortar for the repair of masonry work joints made of mineral binders, natural aggregates and alkali resistant, lightfast pigments.For the production of horizontal and vertical joints in walls, pillars and partition walls For use on brick and natural stone masonry Best results on mortar...
A ready-to-use silicate filler suitable for small crack repair and surface equalisation onto internal mineral surfaces.Mineral based Suitable for full cover and touch-up Maximum filling powerMore Info View Similar Products Delivery Info Consumption Rate Samples
Keim Spachtel is a silicate filler is ready to use and suitable for small crack repair and surface equalisation onto mineral surfaces.Purely mineral filler Potassium waterglass emulsion Interior and exterior use Apply with spatulaMore Information Delivery Info Consumption Rate Samples
Fosroc Expandafoam is a flexible, readily compressible, closed-cell polyethylene joint filler supplied in sheet form and as rectangular strips or circular section cords. Suitable for use as an expansion joint filler in brick and blockwork, isolation joints and hinge joints where a readily compressible low load transfer joint filler is...
Fosroc Hydrocell XL is a cross linked, semi-rigid, closed cell polyethylene sheet material used for forming or filling expansion joints between adjacent in-situ or precast components. Suitable for use in concrete, brickwork and blockwork providing excellent support to sealants subject to hydrostatic pressure and is particularly recommended...
A mineral primer with Graphenstone technology which regulates the texture of the substrate, covers microfissures (<1mm) and homogenises repaired surfaces or old paint scrapes.Can be applied on all interior and exterior surface types common to construction: mortar, brick, concrete, old paint, etc. Breathable, eliminates condensation and...
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
