Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard (London) for corrosion protection.
Recommended Uses
Buildings
Car parks
Petrochemical plants...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:
Up to 90 minutes’ fire resistance
Can be overcoated with compatible decorative topcoat
Water-based
Low odour
Environmentally friendly
Cost effective for large projects
Certificate of supply available on request
Can be applied by brush,...
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating:
For foot traffic, interior and exterior
Anti-slip additive is premixed in the coating
For use on old concrete (>2 yrs), metal and wood
Unique uniform appearance, high gloss
Touch dry: 6 hours, coverage: 8m² per litre
Available in...
Whether it be joint restoration, re-grouting, re-profiling or weather conditioning, most stone and masonry needs some rejuvenation over time.
Remmers and Hydron have products to protect your stone and masonry from all of the above and more. There are Spiral Anchors for reinforcement and crack repair from Remmers, as well as specially formulated treatments in the Nu-Guard range which can last for up to a decade.
KSE Filler A is a mineral powder in the Remmers KSE Modular System. It is used for the production of silicic acid ester (KSE) bound grouts, back filling compounds and battering mortars. Weathered surfaces often have (micro) cracks with dimensions that cannot be sufficiently closed with stone strengtheners on a silicic acid ester base without...
KSE Filler B is a quartz powder in the Remmers KSE Modular System. It is used for the production of silicic acid ester (KSE) bound grouts, back filling compounds and battering mortar. Weathered surfaces often have (micro) cracks with dimensions that cannot be sufficiently closed with stone strengtheners on a silicic acid ester base without the...
Remmers KSE 100 is a soft stone strengthener that is suitable for strengthening fine-pored and low strength, mineral building materials.
Non-hydrophobizing
High penetration depth
Reaction time min. 28 days
Can be used to strengthen historical renders and joints
Reacts with water stored in the pore system or humidity.
This product is...
Remmers KSE 300 is a solvent-free stone strengthener on a silicic acid ester base.
Can be used to strengthen medium pored, absorbent and friable mineral building materials
Ideal for sandstone
It can also be used to strengthen historical renders and joints
Solvent-free
Non-hydrophobizing
High penetration depth
This product is subject...
Remmers Restoration Mortar GF is a pourable, mineral stone replacement mortar for reproducing sculptures in a pouring procedure. For grouting of open and closed forms.
Excellent flow propertie
Suitable for making reproductions
Aggregates mainly correspond to those of a fine-grain sandstone (< 0.5mm)
Image already added
This...
Remmers RM (formerly Restoration Mortar) is used for restoring, supplementing and re-profiling mineral substrates such as natural stone, brick, concrete and synthetic stone.
Low free alkali content
Good flank adhesion
Low inherent stress
UV-resistant pigments
Can be made hydrophobic
Image already added
Remmers Restoration Mortar ZF is a ready-to-use, factory-mixed, dry mortar excellently suited for re-profiling weathered, mineral substrates so that they look like the original.
Available in 3 versions: "fine" (≤ 0.2mm), medium (≤ 0.5mm) and "coarse" (≥ 2mm)
Due to its low compressive and tensile bending strength, it is particularly...
Remmers Restoration Mortar SK is excellently suited for re-profiling weathered sandstone, brick and concrete so that it looks practically like the original.
Specially developed for restoring on a small volume scale
Different variations of sandstone or brick colours found in practice can be matched with practically no deviation from the...
Nu-Guard® AC Coating is a specially-formulated acrylic solution for use on masonry and concrete to protect against carbonation, acid rain and weathering.
Advantages
Outstanding anti-carbonation properties
Protection from acid rain and weathering
Protection in excess of 10 years on properly prepared sound substrates
12-month shelf life...
Nu-Guard Clear AC is a clear acrylic solution that is specially-formulated for use on masonry and concrete to protect against carbonation, acid rain and weathering.
Advantages
Protects against carbonation.
Clear finish.
Protection from acid rain and weathering.
Durable for 10 years.
Touch dry in 1-2 hours.
Rust-Oleum 5110 Verti-Patch is a very strong epoxy repair mortar with special lightweight fillers for repairing damaged vertical concrete, render and stone. It cures as hard as granite, is quickly overcoatable and can be drilled after curing. 5110 Verti-Patch is non-shrink, can be used indoors or out and can be feather edged.
Cures as hard...
Keim Restauro Top is a mineral dry bagged premixed restoration mortar with hydraulic binders used for stone repair. The system consists of natural stone replacement materials for reproducing the colour and texture of the original stone.
Top Features
Easy to apply
Can be colour matched to the stone
Long-lasting
This product is...
Well maintained masonry can offer structural strength to a building, as it is this core building framework that if unprotected can lead to a building partially collapsing, letting in damp, greatly increase heating costs, and more - including being an eye-sore. Masonry repair materials available today at Rawlins Paints can help prolong the durability and strength of your property, whether it is in a coastal environment with harsh salt-water air, or a high-build in a heavily polluted city centre.
Open a Credit Agreement Trade Account at Rawlins Paints
To open a Credit Agreement Trade Account at Rawlins Paints, simply click on the link below to download a Account Application Form. Once filled in, please return the Application Form to [email protected]
Alongside standard Technical and Sales Support Rawlins Paints offers to its customers, Credit Agreement Trade Account members will also benefit from:
